2
A bulb must have a minimum of 1 switch if there are 2 batteries. The batteries can be connected in together via wires to prevent the need for a second switch.
A normally closed switch is a switch that is normally closed. When you operate it, it opens.
Replace switch or "jump wires" on switch to operate windows Replace switch or "jump wires" on switch to operate windows
Connect the two batteries for the voltage needed. If they are 12 volt batteries and the lights are 12 volts, connect the batteries in parallel (negative to negative and positive to positive). If they are 12 volt batteries and the lights are 24 volts, connect the batteries in series (negative of one battery to positive of the other). Run a wire from batteries to first switch, then to two of the lights and the other switch (in parallel). From the second switch run a wire to the third light, then connect all three lights back to the battery.
You either have the lockout on or you have a defective master switch.
Bulb, circuit, batteries, switch, reflectors, and housing.
It combines switching and routing
On the side of the gs there is an on of switch if that doesn't help your batteries dead....
Dead batteries, dead bulb, broken switch.
Bad switch?
You would have to use a dimmer switch I would think.
To take a photo switch the Camera/Video switch so that you see the Camera icon