It is called a "keg"
Quote: Traditionally draught beer came from wooden barrels, also called casks. In the 1950's these began to be replaced by metal casks of stainless steel or aluminium, mainly for quality reasons as they could be sterilised and the beer was therefore less likely to spoil, but also for economic reasons. An additional benefit of the switch to metal casks was that staling from oxygen in the air could be reduced. Subsequently, in the early 1960's a form of metal cask, known as a keg was introduced which allowed for more efficient cleaning and filling in the brewery.
http://en.wikipedia.org/wiki/Cask_ale#The_history_of_cask_and_keg_beer
In the beer brewing industry, filling a cask is called racking, drawing beer from one cask to another is called re-racking. Another possible word in the wine industry is decanting.
Yes it is. A tun is a large beer or wine cask
An English beer cask containing 54 imperial gallons
A beer engine is a device used to manually pump beer from a cask or keg in traditional English pubs. It operates by pulling a handle to draw beer, rather than using a CO2 tank or other pressurized system. This method helps maintain the beer's natural carbonation and often results in a smoother, creamier pour.
Real Ales. see Wikipedia on Cask Ales.
Technically speaking, draught beer is beer served from the cask in which it has been conditioned. This term has been applied, loosely, to any beer served from a large container or keg. More recently, it has been used as a promotional term for canned or bottled beer, in a bid to convince consumers that the beer inside tastes like it came from a cask.
A plug for a cask vent is a device used to seal the vent hole on a cask, typically after it has been opened and partially emptied. This helps preserve the cask's contents by preventing excess air from entering and affecting the beer or other liquids inside.
The most common cask used for maturing wine is a 225litre Barrique made from French or American would normally.
A barrel of beer is equal to two kegs or 31 gallons, which is roughly 13.8 24-unit cases of 12-ounce cans or bottles
The answer is, liquid nitrogen ISN'T used in beer cans. Nitrogen GAS is. And the reason nitrogen gas is used in beer cans is to emulate draft beer such as one would get out of a keg(as opposed to cask) beer.
1 gallon weighs 10lb, so 9 gallons weighs 90 lb or 41kg. Edit: This answer ignores the empty weight of the cask itself. The cask weighs 20-30lbs depending on manufacturer, so the weight of a full cask is around 110-130lbs
the dregs