answersLogoWhite

0

Check to make sure you hav the rings installed correctly.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you adjust Ithaca model 300 shotgun heavy loads to light loads?

To adjust an Ithaca Model 300 shotgun from heavy to light loads, you need to change the gas system settings, if applicable, and ensure the correct ammunition is used. Check the gas ports for any obstructions and consider using a lighter recoil spring if necessary. Additionally, ensure the shotgun is clean and well-lubricated to facilitate smooth cycling with lighter loads. Always consult the owner's manual for specific guidance on adjustments and load recommendations.


How do you change a browning shotgun for heavy loads?

To change a Browning shotgun for heavy loads, you typically need to adjust the gas settings or change the recoil spring, depending on the specific model. For gas-operated models, you may need to switch to a heavier gas piston or adjust the gas port settings. Additionally, ensure that you are using appropriate heavy load-rated ammunition, as standard loads may not function reliably. Always refer to the owner's manual for specific instructions related to your shotgun model.


Is a mossberg model 500 12 gauge shotgun good for turkeys?

With the right loads and choke, yes


Why won't a Remington Model 11 automatically reload?

One possible problem is : The Rem. 11 shotgun has an adjustable recoil system., You can adjust it for light, medium or heavy loads. If it's adjusted for heavy loads, it won't work for light loads, etc. etc. Send me an email & I'll send you a scan of the adjustment procedure. You have to remove the handguard & move some small parts around.


What are magnum shotgun loads?

Loads that carry more shot and powder.


What does the adjustable fore-end cap nut on the sportsman 58 shotgun do?

Besides allowing you to remove the shotgun's fore-end and barrel for cleaning, the adjustable cap nut (featuring 'H' and 'L' around it's perimeter) adjusts the shotgun for use between different shotshell loads. You would want to set the nut to "L" when using target loads or light game loads (low-brass shells) and use "H" for heavy shells with high brass. I believe my manual indicates that shot size 00 to 4 would fall under the "H" setting, but I can't remember off-hand. Being that the gun is gas-operated, the nut allows/restricts gas to enter the piston chamber to actuate the bolt and cycle to the next round. Using a heavy load on the light setting would cause too much gas to enter the piston chamber and can possibly harm your shotgun's action. Using light loads on the "H" setting is OK, but your shotgun won't have enough gas to cause it to cycle normally, probably causing the bolt to not open after firing or causing a jam. Remington improved their system on subsequent autoloaders, which is why you don't see it on the 1100s.


Is there a way to reduce severe recoil of a light twenty Browning A5 shotgun?

There shouldn't be severe recoil with a Browning A5. Check the friction rings and make sure they are set for the correct loads: Light vs Heavy Loads. If the friction rings are set for light loads, and you are shooting high brass, then it will kick harder than it needs to be.


Is it safe to shoot modern loads in a Winchester 1897 shotgun?

Not recommended.


Can you hunt duck with a Marlin Model 28 serial 10249 with the last patent date of Dec 21 1909?

You could, just get "light" loads for this gun. Winchester feather loads are good.


My browning magnum 12 gauge shotgun is jamming--it is not ejecting the chamber shell?

The gun is probably set for heavy loads with the friction rings, and the loads are too light. Remove the forend. Inside the wood forearm may be a diagram to show how the bevels and brass friction ring should be set for light vs heavy loads. If no diagram, go to Browning .com and there you can find a diagram, but remember to find the Mag 12, it is different from a standard A-5. When shooting heavy 3" loads, set the rings to heavy. When shooting 2 3/4 lighter loads set for light.


Is a baikal safe for magnum load?

The Baikal shotgun is generally designed to handle standard loads, but whether it can safely handle magnum loads depends on the specific model and its construction. Always refer to the manufacturer's guidelines and specifications for the exact model you own. If you're uncertain, it's best to consult with a knowledgeable gunsmith or the manufacturer directly to ensure safe usage. Using inappropriate loads can lead to safety hazards and damage to the firearm.


What is no 5 shot in shotgun loads?

@170 pellets per oz. Good for phesant.