YES
A motherboard form factor\ determines the size of the board and its features that make it compatible with power supplies cases processors and expansion cards. Beginning with the Intel i800 series of chipsets a hub.
This is a microATX (mATX) motherboard that measures 9.6 inches on a side, which is the maximum size for a mATX board. The minimum size for this style of board is 6.75 inches on a side.
The size of the battery plates and amount of electrolyte.
They are not compatible. You cannot connect any AC device to a DC battery without a inverter. The size of the inverter determines what it will run. And the wattage of the fan determines what size inverter to buy.
No, The battery size determines the Rate of Fire or how fast it shoots. The fps is determined by the spring.
Actually, the CORRECT answer is that the form factor of motherboards pertains to the size and shape of the board. There is no other answer to this question.
The original (ROM00 and ROM01) models used a '1/2 AA' battery soldered directly to the motherboard. The ROM03 uses a 1/2 AA in a patic battery holder, and is more easily replaced.
It is an ATX motherboard. But even though it is an ATX size it is a company specific motherboard, and is not compatible with standard ATX cases.
The motherboard is the main printed circuit board and contains the buses, or electrical pathways, found in a computer. These buses allow data to travel between the various components that comprise a computer. A motherboard is also known as the system board, the backplane, or the main board. The motherboard accommodates the central processing unit (CPU), RAM, expansion slots, heat sink/fan assembly, BIOS chip, chip set, and the embedded wires that interconnect the motherboard components. Sockets, internal and external connectors, and various ports are also placed on the motherboard. The form factor of motherboards pertains to the size and shape of the board. It also describes the physical layout of the different components and devices on the motherboard. Various form factors exist for motherboards. An important set of components on the motherboard is the chip set. The chip set is composed of various integrated circuits attached to the motherboard that control how system hardware interacts with the CPU and motherboard. The CPU is installed into a slot or socket on the motherboard. The socket on the motherboard determines the type of CPU that can be installed. The chip set of a motherboard allows the CPU to communicate and interact with the other components of the computer, and to exchange data with system memory, or RAM, hard disk drives, video cards, and other output devices. The chip set establishes how much memory can be added to a motherboard. The chip set also determines the type of connectors on the motherboard. Most chip sets are divided into two distinct components, Northbridge and Southbridge. What each component does varies from manufacturer to manufacturer, but in general the Northbridge controls access to the RAM, video card, and the speeds at which the CPU can communicate with them. The video card is sometimes integrated into the Northbridge. The Southbridge, in most cases, allows the CPU to communicate with the hard drives, sound card, USB ports, and other I/O ports. sorry , it is only defination.
The size of the normal force and coefficient of friction determines the size of frictional force.
325mm across
The rate at which magma cools determines the size of the mineral crystal.