hp= 745.699872
so if the rated voltage is 220 so 745.699872 /220=3.389 A
To answer this question the voltage of the motor must be stated.
Yes! One HP equals 749 watts. W = V . I 220 . 7 = 2.056 In reality, with 7 amps in 220 v you have more than 2 HP. By Nonô - BRAZIL Yes! One HP equals 749 watts. If you have 7 amps on 220 v, as watt = volts . amps, 220 . 7 = 1540 watts 1540 / 7498 = 2.056 HP. You have more than 2 hp. By Nonô - BRAZIL
A single phase 10 HP motor will draw aproximately 50 amps. A three phase 10 HP motor will draw aproximately 28 amps.
Then you are trying to get more HP out of the motor that it can supply. Back off on the load that the motor is driving or put a bigger motor onto the load.
There are 746 watts in 1 HP. Watts = amps x volts. It depends on the voltage rating of the motor. Amps = 746/volts = ? need voltage.
To answer this question the voltage of the motor must be stated. I = W/E. 1 HP equals 746 watts.
To answer this question the voltage of the motor must be stated.
20.833 amps at 240volts equals 5000 watts. Wattage is volts times amps.
what is the full load amps for 2.4 hp motor at 460 volts ?
Yes! One HP equals 749 watts. W = V . I 220 . 7 = 2.056 In reality, with 7 amps in 220 v you have more than 2 HP. By Nonô - BRAZIL Yes! One HP equals 749 watts. If you have 7 amps on 220 v, as watt = volts . amps, 220 . 7 = 1540 watts 1540 / 7498 = 2.056 HP. You have more than 2 hp. By Nonô - BRAZIL
A single phase 10 HP motor will draw aproximately 50 amps. A three phase 10 HP motor will draw aproximately 28 amps.
It depends on the voltage-- I think at 110v it's 4 amps per hp
Then you are trying to get more HP out of the motor that it can supply. Back off on the load that the motor is driving or put a bigger motor onto the load.
There are 746 watts in 1 HP. Watts = amps x volts. It depends on the voltage rating of the motor. Amps = 746/volts = ? need voltage.
read the name plate on the motor
24.87amps 1 hp=746 watts P=IxV ... (746x8)/240
T430.247 of the NEC shows that a 1 hp motor operating at full load on 115v will draw 16 amps, called Full Load Current (FLC). Conductors supplying this motor are required to be 125% of FLC which is 20 amps. Motor circuits are complicated things and do not follow the rules of other circuits. This motor, while drawing a maximum of 16 amps at full load and supplied with #12 AWG copper conductors can be protected by a breaker of 40 amps.