Does the engine have spark? White fumes could possibly be fuel vapor.
by the gas pedal and brake. should be a lever that says something like, "pull for fuses"
with rivets
Push the gas pedal all the way to the floor while cranking the engine.
The clutch pedal is the one left of the brake pedal. The clutch disk the pedal affects is inside the transmission bell housing where the engine block bolts to the transmission. Unless you have an automatic, then your car has no clutch.
Turn the key on then push the gas pedal to the floor 3 times. Then turn key off and then start engine.
ignition on - engine off - floor the gas pedal 3 times. That's it!
AnswerIgnition on - engine off - floor the gas pedal 3 times. That's it!
Put a chevy LS2 engine in it <<>> Put your foot down further on the accelerator pedal.
Look on the engine side of the firewall in front of the clutch pedal. You should see the reservoir there.
If the gas pedal is sticking on a 1980 Chevy, it is possible that the cable is wearing out. Check for slack in the cable. There could also be dirt on the pedal itself that is causing it to stick.
ignition on - engine off - floor the gas pedal 3 times. That's it! LOOK IN YOUR OWNERS MANUAL!
The break pedal will be hard to push are when you push the brake pedal all the way down the engine will start running rough are you may even here air sucking / Vaccum leak.