Engine
Alternator
Cooling and exhaust systems
fuel tank
voltage regulator
control panel
Armature, field magnet, slip rings in case of AC generator or split rings in case of DC generator and carbon brushes.
Electromagnet
As the name implies, a motor-generator set utilizes an electric motor as the prime mover to drive a generator. The motor and generator can be mounted on a common shaft or they can be mechanically connected through a coupling, belt drive system or reduction gear.In all cases, the motor requires a source of power (from whichever electrical supply service is available) and it drives the generator to produce the required electrical output power. For instance, if a single-phase supply service is the only service available at a location, the generator's output could be three-phase ac which could be used to supply power to machinery which has three-phase motors, etc.If a site has equipment which requires only direct current the generator could be one that produces dc. That is a less common setup because a full-wave rectifier could easily be used to produce plain dc from ac, but a motor-generator set can still be used for very specialized applications which need highly accurate control of a dc motor under varying load conditions. The Ward Leonard Drive System is a specialized example of such a motor-generator set. (See the Related Link below for more information.)Nowadays, because high-power electronic inverter units are sold to produce a three-phase service from a single-phase service, motor-generator sets are used mainly for very specialized industrial sites, for engineering development and for scientific research applications.It should be noted that there is no need to use a motor-generator set or an inverter unit to produce single phase from three-phase because any one line of a star-connected three-phase service, along with a neutral wire connected to the central star point, can easily be used as a single-phase service.The Related Links below give a lot more information about motor-generator sets.
This from the "Induction motor" article in Wikipedia: "In principle, any AC electrical generator can be called an alternator." The only difference between an AC motor and an AC generator is whether one has electrical energy put in to get mechanical energy out, or whether one has mechanical energy put in to get electrical energy out. That means the answer to your question is basically, "There is no physical difference between an AC motor and an alternator." The unit in question can be used in either way, and assumes a name based on which way it is used.
The motor has to be a dual voltage motor for this operation to happen. This will be a six coil motor. Each motor coil will be rated for a 220 volt drop across it. For the high voltage connection the motor's coils are connected in series between L1 and L2, L2 and L3, and L3 and L1. For the low voltage connection the motor's coils are connected in parallel between L1 and L2, L2 and L3, and L3 and L1.See sources and related links below. Look on page 76 and 77.
A generator or an alternator.
Open the .html -file in text editor (like windows notepad), delete the line <meta name="Generator" content="Serif WebPlus 11.0"> and save the file.
Motor inside and outside movement and non movement material
Surprisingly there's quite a few screen name generator websites such as Fantasy Name generator, Gangsta Name, Generator Land, Name Station, and SpinXO to name a few.
An electric motor or a generator changes energy from or to electromagnetic energy, respectively.
name a device that convert the mechanical energy into electrical energy
an induction generator
A company name generator is pretty self explanatory. It is a generator which will help come up with a company name that suits a persons' company well.
The name of the motor that can only operate on alternative current is called the AC motor. The AC motor consists of 2 basic parts with a rotor that is attached to the output shaft.
first dc generator is max generator donno who invented t
As the name implies, a motor-generator set utilizes an electric motor as the prime mover to drive a generator. The motor and generator can be mounted on a common shaft or they can be mechanically connected through a coupling, belt drive system or reduction gear.In all cases, the motor requires a source of power (from whichever electrical supply service is available) and it drives the generator to produce the required electrical output power. For instance, if a single-phase supply service is the only service available at a location, the generator's output could be three-phase ac which could be used to supply power to machinery which has three-phase motors, etc.If a site has equipment which requires only direct current the generator could be one that produces dc. That is a less common setup because a full-wave rectifier could easily be used to produce plain dc from ac, but a motor-generator set can still be used for very specialized applications which need highly accurate control of a dc motor under varying load conditions. The Ward Leonard Drive System is a specialized example of such a motor-generator set. (See the Related Link below for more information.)Nowadays, because high-power electronic inverter units are sold to produce a three-phase service from a single-phase service, motor-generator sets are used mainly for very specialized industrial sites, for engineering development and for scientific research applications.It should be noted that there is no need to use a motor-generator set or an inverter unit to produce single phase from three-phase because any one line of a star-connected three-phase service, along with a neutral wire connected to the central star point, can easily be used as a single-phase service.The Related Links below give a lot more information about motor-generator sets.
As the name implies, a motor-generator set utilizes an electric motor as the prime mover to drive a generator. The motor and generator can be mounted on a common shaft or they can be mechanically connected through a coupling, belt drive system or reduction gear.In all cases, the motor requires a source of power (from whichever electrical supply service is available) and it drives the generator to produce the required electrical output power. For instance, if a single-phase supply service is the only service available at a location, the generator's output could be three-phase ac which could be used to supply power to machinery which has three-phase motors, etc.If a site has equipment which requires only direct current the generator could be one that produces dc. That is a less common setup because a full-wave rectifier could easily be used to produce plain dc from ac, but a motor-generator set can still be used for very specialized applications which need highly accurate control of a dc motor under varying load conditions. The Ward Leonard Drive System is a specialized example of such a motor-generator set. (See the Related Link below for more information.)Nowadays, because high-power electronic inverter units are sold to produce a three-phase service from a single-phase service, motor-generator sets are used mainly for very specialized industrial sites, for engineering development and for scientific research applications.It should be noted that there is no need to use a motor-generator set or an inverter unit to produce single phase from three-phase because any one line of a star-connected three-phase service, along with a neutral wire connected to the central star point, can easily be used as a single-phase service.The Related Links below give a lot more information about motor-generator sets.
There are a number of motor options available for the Daewoo Matiz. As there is a virtually identical car marketed under the name Chevy Spark, made by GM, parts such as the motor are interchangeable.
Look at the name/model plate which will be present somewhere on the generator.