0
What else can I help you with?
How do you clear OBD codes on a 2004 Cadillac?
You need a OBD 2 scanner/reader to erase the codes
Can a OBD II scanner erase trouble codes and have the vehicle pass inspection?
The scanner can erase codes but if there is a problem the codes will immediately come back. So the answer is no.
How do you access Chevrolet diagnosis codes?
Need to know if you have OBD I or OBD II or tell us what year the Chevrolet is.
How do you retrieve codes on a 02 sunbird?
You need to plug an OBD scanner into it.
97 Honda Prelude obd-ii to obd-I conversion?
The 1997 Honda Prelude has OBD II, there is no conversion. You will need a scan tool or code reader that is capable of reading OBD 2 codes. From 1996 up all vehicles with few exceptions are mandated by the Government to have OBD II systems. This was put into place to standardize codes and make diagnosing problems easier.
How do you retrieve obd codes on Volvo v70xc awd 2000?
You need an OBD scanner or take it to your local Auto Parts store. Stores like Advance auto parts can usually read codes for you. The generic codes they read out can be converted to Volvo's OBD codes. The generic codes usually start with the letter P.
Will as obd II Read obd I codes?
No, it will not.
How do you check the engine codes on a 1992 Nissan pathfinder?
You need an OBD I scanner.
1990 Dodge Dakota engine light code?
obd (1) codes are generic, same for all domestic obd(1) two or three digit codes
What is the best obd 2 to own?
I mean OBD2 scanner If all you want it to do is read and erase the codes, a cheap one for under $60 is all you need.
Were can you buy a obd1 diagnostic tool?
On some cars all you need to read OBD 1 codes is a paper clip. You can but OBD 1 tools at some part stores and online at places like Ebay.
How do you get obd codes for a Daewoo Nubria 1999 model?
To retrieve OBD codes from a 1999 Daewoo Nubira, you will need an OBD-II scanner, as this model is equipped with an OBD-II system. Connect the scanner to the OBD-II port, which is typically located under the dashboard near the driver's seat. Turn on the ignition without starting the engine, and follow the scanner's instructions to read the error codes. Make sure to note any codes displayed for further diagnostics or troubleshooting.
