0
What else can I help you with?
How do you retrieve codes on 2005 BMW?
Same as on all new cars -- attach an OBD-II compliant code reader to the OBD-II socket, located on the lower left of the dash, and read the codes.
How do you get obd codes for a Daewoo Nubria 1999 model?
To retrieve OBD codes from a 1999 Daewoo Nubira, you will need an OBD-II scanner, as this model is equipped with an OBD-II system. Connect the scanner to the OBD-II port, which is typically located under the dashboard near the driver's seat. Turn on the ignition without starting the engine, and follow the scanner's instructions to read the error codes. Make sure to note any codes displayed for further diagnostics or troubleshooting.
Can you read Taurus 2001 diagnostic codes without an OBD II tool?
No. I don't know the Taurus, specifically, but the OBD II standard does not provide non-computer access to codes, such as with the older GM CCC system using a jumper.
Which terminals are jumpered on the OBD connector on a 1996 Ford Thunderbird for DTC retrieval?
That would be a OBD II system. You need a code scanner to read the codes.
Where do you plug the OBD-II Diagnostic Tool to read codes on a 1999 Toyota Camry?
may be this website may help: plusobd.com/
What are some uses for the OBD2 scanner?
The OBD II scanner is an on-board diagnostic tool. It is a device that can read trouble codes when connected to a vehicle's computer. The OBD II scanner will only work on automobiles manufactured in 1996 and later.
How do you read codes on infinti qx4?
The Infinity QX4 codes is equipped with On Board Diagnostics II (OBD II). The codes can be read by purchasing a hand held code reader and checking the error codes against a service manual. Certain automotive parts retailers in the United States that include AutoZone and Advance Auto do complimentary OBD error code scans in addition to battery & alternator load testing.
Where are the terminals that you need to jump to check the check engine light?
Need to know what year vehicle. OBD I, you can jump to read codes, OBD II, you can't. The change was made in 1997 I think.
Were can you buy a scan tool for a 1996 350 suburban?
1996 is the year that most automobile manufacturers converted from OBD I (On Board Diagnostic I) codes to OBD II codes. There are 'code scan tools' and 'engine scan tools', the difference being that codes scan tools can read the OBD codes from the vehicle and erase them, and engine scan tools do the above, in addition to read live data from all of the sensors while the engine is running. These latter tools are more expensive, but depending on the type of work that you plan on doing, you need to choose which type of scan tool that you need. I just bought an Actron CP9175 at Sears yesterday for $79.99 ($50 off) which is a code scan tool that reads OBD II codes only. The more expensive engine scanning tools often read both OBD I and OBD II codes. Sears has these tools online, as well.
How do you read fault codes on a Hyundai sonata?
A person can read the fault codes on a Hyundai Sonata by connecting an OBD II code reader to the vehicle's computer. It displays all the errors detected, as well as a brief description.
Why won't my obd 2 scanner read codes on a 2001 mercury villager?
Perhaps there are no codes set to read.
How do you retrieve obd codes on Volvo v70xc awd 2000?
You need an OBD scanner or take it to your local Auto Parts store. Stores like Advance auto parts can usually read codes for you. The generic codes they read out can be converted to Volvo's OBD codes. The generic codes usually start with the letter P.
