0
1996 is the year that most automobile manufacturers converted from OBD I (On Board Diagnostic I) codes to OBD II codes. There are 'code scan tools' and 'engine scan tools', the difference being that codes scan tools can read the OBD codes from the vehicle and erase them, and engine scan tools do the above, in addition to read live data from all of the sensors while the engine is running. These latter tools are more expensive, but depending on the type of work that you plan on doing, you need to choose which type of scan tool that you need. I just bought an Actron CP9175 at Sears yesterday for $79.99 ($50 off) which is a code scan tool that reads OBD II codes only. The more expensive engine scanning tools often read both OBD I and OBD II codes. Sears has these tools online, as well.
What else can I help you with?
What size engine does a 1996 Chevrolet Suburban 2500 has?
That would be the 350 or the 454
How do you time a 1998 350 vortec?
To time this engine correctly you will need a scan tool. Using a scan tool you will watch the cam retardation and set it plus or minus 2 degrees from 0.
Will a 350 motor from a 1987 suburban swap into a 1997 suburban with a 350 motor?
no.
How do you set timing on a 98 Chevy 350 vortex?
In order to set the timing on a 98 Chevy 350 vortex, you have to time with a scan tool that will let you set timing. Or let garage do it
How do You Turn off check engine light on 2004 F-350 diesel?
with scan tool but you must fix the problem to keep it from comming on .
What is the Firing order of 1996 gmc suburban 350 engine?
1-8-4-3-6-5-7-2 Clockwise on the distributor cap.
What kind of transmission is in a 1996 Chevy 1500 4x2 suburban with the 5.7L vortec 350?
That would be the 4L60E transmission. The 4L80E was used in the 3/4 tons
Will 1994 Chevy Suburban 350 motor bolt up to 1996 Chevy Suburban?
I don't think so, given that the engine became computer controlled in 1996. I they are the same size they might bolt up just fine but I'm not sure how much work it would be to convert it to computer control. The Suburban and Silverado drive trains were almost unchanged from 1988 thru 1995 and 1996 thru 2000.
Will a radiator from an 2000 350 fit a 1997 suburban?
NO it will not.
Will a 1974 4 bolt 350 match up to a stock tranny from 1996 v-6 camaro engine is from a 1974 suburban and will it support 550hp on engine and 750hp on spray?
no
How much is a CT scan of abdomen?
$350-450
How do you Replace head gasket Chevy Suburban?
what is the preceger for replacing the head gaskets on a 1993 chevy suburban 4x4 350
