Located in the passenger side kick panel
no power on the power windows switch
You'll need to add the necessary relay and fuse, you'll probably have to do the wiring yourself, and you'll be better off to take the doors from one which already has power windows, rather than trying to convert yours to power windows.
To use the power to switch on the light, locate the light switch and flip it to the "on" position.
To close the rear windows on a Mercury Monterey, locate the window switch on the driver's door panel, typically located near the power window controls. Press the switch in the direction that closes the rear windows until they are fully raised. If the windows do not close, there may be an issue with the power window system that requires further inspection by a professional.
The 1998 Mercury power window relay switch can be found below the dashboard. The relay switch will be on the drivers side of the dashboard.
Sometimes it is the switch.
Allright with a voltimitter check your switchs so when you roll them up or down you have power to the switch if not its your door switch. if you do have power check if you have power to your motor. there is no relay switch theres only fuses.
the power window fuse is in the fuse box on the passenger side of the dash. Open the passenger door to locate the fuse box. the power windows is fuse holder #26.
trying to locate the correct fuse for my F150 4.2L Ford pick-up. (3 door) Both windows quit working with hours of each other, and I have already put in a new switch.
You may have a short in the power window switch.
This is a guess , but check fuse # 14 - 15 amp - for ACCESORY DELAY RELAY ( power windows , moonroof , Flip windows )
broken switch or fuze