working from memory at work. when you purchase the plug or socket they usualy have a diagram. looking at the socket on the truck....9 oclock left signal. 3 oclock right signal. 11 oclock tail lights. 7 oclock ground. 5 oclock electric brakes. center live power from battery ( campers) I dont use the 1 oclock plug at this time.
hope this is helpfull. I used the package to do the first ones. we have 8 trucks wired this way to match the 3 floats we use.
An elementary is a schematic or one line diagram showing the basic operation of a circuit and is best used for troubleshooting or discussing circuit operation. A wiring diagram shows point to point wiring connections, terminal points, component layout etc. and is used to connect and build a circuit.
Check in the wiring at the point where it comes into the door from under the dash. Alot of times, wires get pinched at this point.
This is not really an answer,but I have a problem with a wiring harness on my 93 caravan also. I have not gotten to the point of solving the problem, but was wondering if you got your problem solved and if you found a diagram and where did you get your wiring harness? Another searcher!!!!
Try the library. Motor Manual. In the reference section. Laird Here is point style ignition diagram http://www.geocities.com/chevroletc1070/wiringdias.html
You have a grounding problem at the trailer. The white wire is the ground on trailer wiring. The taillights are brown, the signals and stops are yellow and green. Sometimes the white wire will loose its continuity with the truck, causing the lights to black out. It could also be a wiring issue with the trailer itself, but most likely its the ground giving you feedback and causing the blackout. run a wire from the ground contact on your plug back to a spot on the tongue and secure the end of the wire to the trailer at that point. Do not rely on the contact of the trailer with the ball hitch to establish a ground.
You can try to ask for this at any authorized Honda bike dealership. They will point you in the right direction.
Go to a Ford service department. They will either have the manual or point you in the right direction.
you can try www.autorepair.about.com
A coupler is the connection point mounted on the trailer which connects the trailer to the vehicle.
You should not need a wiring diagram. If the generator has a star point (wye) connection then the phase voltage to ground (star point) is 277 volts. 480/1.73 = 277.
You can try to ask for this at any authorized Honda bike dealership. They will point you in the right direction.
I believe back in '51 it was the "Olds 88." I was able to locate a site that might give you what you've been searching for - or at the least a great starting point. The wiring diagram I found was for the '57 Olds, but hopefully it might be of help. The site might be able to chase down what you need. http://www.oldirononline.com/ Oldsmobile wiring diagramshttp://www.oldcarmanualproject.com/tOCMP/wiring/5765wiring%20diagrams/Oldsmobile/MWire5765-276.jpgTom Ridge