NO. When your done with the job. Just turn the key on for 3 to 4 seconds. Then turn key OFF for 5 seconds then back on again for 3 to 4 seconds. Repeat all steps again and then start the engine, It will be PRIMED then. Good to go.
You fail to list the year, so it is impossible for me to answer. If your car is Fuel Injected, it has an electric fuel pump. If it has a carburetor it has a mechanical pump.
Unsure what you mean set? But if you replace a fuel pump in your tank, if fitted properly should pump fuel as soon as you put ignition on and start car.
Both 8 and 16 valve GTIs are fitted with two fuel pumps, a lift-pump which is fitted in the fuel tank and the external fuel pump under the car body. If the lift-pump fails the external pump has an increased workload which can result in its failure. Lift pump failure is usually accompanied by a loss of engine power due to insufficient fuelling.
Yes, and it can also whine if the fuel filter is partially clogged.
Fuel pump is in the fuel tank, the filter, if fitted, is in-line, usually a grey cylinder in the engine compartment.
takes about an hour you access from under rear seat.. unit fitted to fuel tank...check FUEL PUMP RELAY first ....
To stop fuel flow to engine in case of accident
well if you have fuel and a new filter a good fuel pump relay and the wires going to the fuel pump have power and no fuel pressure you need a fuel pump
The fuel pump is in the fuel tank, you need to remove the fuel tank to remove the fuel pump.
When it fails to pump fuel as it should.
Maybe you need to get a new fuel pump.
the fuel pump is located in the gas tank ,you need to drop the tank to access the fuel pump.