answersLogoWhite

0


Best Answer

Likely causes are:

1) back of pad rubbing on caliper or caliper piston.

2) glazing on either the pad or rotor

3) (much less likely) some part of the brake system may be rubbing when braking.

I would suggest disassembling the brakes, and lightly sanding the face of the pad (the part that rubs on the rotor) with some medium grit sandpaper. You don't have to sand hard, all you want to do is break up and glaze on the surface. Then get some "brake quiet", this is usually sold as an spray or in a tube. Spray that on the *back* of the pad (the part that doesn't touch the rotor). DO NOT get any on the rotor or the face of the pad as it will negatively affect braking. Re-assemble the brakes and take it for a test drive.

If the glazing is on the rotor, it will need to be replaced or resurfaced to remove it.

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: NoisY FRONT BRAKES ON PT CRUISER. PADS AND ROTOR GOOD?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Front right rotor is grinding on disc brake mount on 2002 ford escape?

Replace rotor / cut rotor & replace brakes.


What makes a scrubbing sound on front passenger side brakes?

Your brakes are probably getting low and they are rubbing against the rotor.


What is the minimum front brake rotor thickness for 1998 Chrysler sebring jxi?

The minimum front brake rotor thickness is three aids of an inch. When the rotor does not have the minimum thickness the auto mechanic replacing the brakes can not use the rotor.


Are there Drum or rotor brakes in rear of 2000 explorer?

disc brakes in front and rear ( rotor ) Also , the rear rotors have a small drum on the back of them for small emergency brake shoes


How you remove a front brake rotor on a 2004 Chevy Colorado?

The front brake rotor, on a 2004 Chevrolet Colorado, can be removed by first removing the wheel. Next, remove the brakes. The rotor will slide off


What causes a front wheel to sound like it is rubbing?

Worn bearings, loose rotor, warped brake rotor, sticking brakes.


What causes a 1995 Chevy tracker to make a groaning or a squealing noise at the front rotor brakes during a stop?

When the brake pads are worn the rivets will actually touch the brake rotor when the brakes are applied. The brakes should be changed immediately.


Why do your front brakes sometimes oscillate on 1998 E150 clubwagon?

Warped rotor is the most likely cause.


Why are helicopters noisy?

Older helicopters had noisy rotor blades, modern ones are very quiet.


How much should a brake repair cost for a 2006 Infiniti G35?

If the the brakes replace from a dealer for the front brakes including re-surfacing the rotor disc is.......$420.00


Are there special tools needed to replace the rear rotor and pads on a 1997 Legacy GT?

first off are they disk brakes, (like the front one)? or drum brakes?


What statements is true about disc brakes?

Periodic front disc brake adjustment is needed to prevent rotor warpage