You need too change the clock spring in the steering wheel. MY 2001 sebring had the same problem, changed it now it's ok. Horn and cruise control works now./
2004 sebring convertable cruise control not working - what to do?
The Chrysler Sebring cruise control switch is located beneath the dashboard, on the drivers side. The cruise control switch should be labeled as such.
The most likely common cause is a failed clockspring in the steering column.
In a 2004 Chrysler Sebring, the fuse for the cruise control system is typically located in the fuse box under the dashboard on the driver's side. You can find the fuse box by opening the driver's door and looking beneath the dashboard, near the steering column. Check the owner's manual for the exact fuse number and specifications related to the cruise control. If the fuse is blown, replacing it should restore functionality to the cruise control system.
The engine computer controls the cruise.
There isn't a separate fuse for the cruise. The switch has probably failed.
Not used. It is driven by the PCM
The steering is what controls the gauge in cruise control. This is in any car or truck.
To replace the cruise control on a 1995 Toyota Tacoma, first, disconnect the battery to ensure safety. Remove the steering wheel cover and carefully detach the cruise control switch from the steering column. Install the new cruise control switch by connecting it to the existing wiring and securing it in place. Reassemble the steering wheel cover and reconnect the battery before testing the new cruise control system.
on the steering wheel
To the left of the steering wheel, below the dashboard is a button that says cruise control. Push that button in, the dash will illuminate the cruise control light. Then, as you reach the speed you want to cruise at, push the button on the steering wheel that says "set". When you want to turn cruise control off, simply tap the brake pedal and the cruise will go off.
cruise control