You need too change the clock spring in the steering wheel. MY 2001 sebring had the same problem, changed it now it's ok. Horn and cruise control works now./
2004 sebring convertable cruise control not working - what to do?
The Chrysler Sebring cruise control switch is located beneath the dashboard, on the drivers side. The cruise control switch should be labeled as such.
The most likely common cause is a failed clockspring in the steering column.
In a 2004 Chrysler Sebring, the fuse for the cruise control system is typically located in the fuse box under the dashboard on the driver's side. You can find the fuse box by opening the driver's door and looking beneath the dashboard, near the steering column. Check the owner's manual for the exact fuse number and specifications related to the cruise control. If the fuse is blown, replacing it should restore functionality to the cruise control system.
The engine computer controls the cruise.
There isn't a separate fuse for the cruise. The switch has probably failed.
The steering is what controls the gauge in cruise control. This is in any car or truck.
Not used. It is driven by the PCM
on the steering wheel
To the left of the steering wheel, below the dashboard is a button that says cruise control. Push that button in, the dash will illuminate the cruise control light. Then, as you reach the speed you want to cruise at, push the button on the steering wheel that says "set". When you want to turn cruise control off, simply tap the brake pedal and the cruise will go off.
cruise control
The standard location of the cruise control module is on the steering wheel. In 1993 some models have a side arm that houses the cruise control module.