Pull the gauge cluster out and use a low volt solder iron, and re-solder the points where it plugs in to the cluster, just heat it until the solder starts to melt.
If a person works on a car, it is important to have a diagram. A belt diagram can be found on the inside of the hood, or in a maintenance books.
between the brake pedal and fuse block on the driver side. You may hear it click if it still works.
The relays are located on the driver side inner fender... I heard that you can take the horn relay out and change it with the fuel pump relay and if the fuel pump works and horn doesnt then you know that it was the relay... Fuses are easy to check, just look at it, if it is broken then its the fuse.
No, Sorry the Voyager is not at at&t.The Voyager only works for the company Verizon Wireless
Try turning the key to the on position then back to off 4 times, then press the driver's door lock button. You should hear a chime if it works.
They are probably dim because the plastic lens has faded. You can clean them with a product called CrystaLenz. I use this product when I detail headlights at used car dealerships, and it works extremely well. Check out their website www.CrystaLenz.com for more information.
it doesnt
no it doesnt i have it and it works
Works great.
i think it doesnt works!
I have a 1998 Plymouth voyager that had the same problem. Small fuel filter clogged. If not that look for a crimp in the fuel hose coming from the line behind the engine. It gets caught now and then.
on plants vs zombies it works for some and not for others sadly it doesnt work for me and hopefully it workes for most others but it works for some and doesnt for others!