beneath the exhaust manifold on the backside of the engine compartment to the right and slightly above the oil filter. you must reach it from beneath the engine by putting your hand up between the CV joint and the frame. it is a pain in the butt to remove because the electrical clip is hard to separate from the sensor. on some models, a special deep socket is needed to unscrew the sensor from the engine block.
The oil pressure sending unit on a PT cruiser can be found on the upper front cover of the engine. Remove the retaining nut and the sensor will come out. Reverse the process to install the new sending unit.
It's located to the left of the oil filter.
Which sending unit?
No.
location of oil level sending unit 6.6 disel
The oil sending unit is located next to the oil filter...
The oil sending unit on a 2002 wrx subaru is almost under the alternator. I suggest you remove the alternator and it is easier to remove the oil sending unit.
The oil sending unit is located on the back side of the engine on a 2002 Lancer. It is under the intake manifold.
Behind the A/C compressor on the engine block. 3.0 liter engine
You failed to mention what sending unit you are referring to suac as fuel Or oil.
the oil sending unit is located right above the oil filter.
the fuel pump and sending unit are combined in tank called fuel pumrp modual.