0
On a Saturn LS1 is there a fuse in the car that controls the lock unlock panic remote?
Wiki User
∙ 14y ago
the key less entry is controlled by the body control module.There isn't a specific fuse for that operation. There are fuses for the lock actuator. Not knowing your specific problem its had to understand what you want.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Which keyless remote goes to a 2004 dodge stratus rt coupe?
The black square remote goes to the sxt and r/t coupe. It has the lock, unlock & turnk button on the front and a red panic button on the back. The black square remote goes to the sxt and r/t coupe. It has the lock, unlock & turnk button on the front and a red panic button on the back. The black square remote goes to the sxt and r/t coupe. It has the lock, unlock & turnk button on the front and a red panic button on the back.
Does the remote for key less entry in a 2006 Mazda 3 contain trunk release If so which button does that?
No, the only features on the 2006 Mazda 3 Keyless Entry Remote is Lock, Unlock, and Panic.
Why do Headlights open when you unlock doors with remote?
I am not sure if that is a problem for your car or not. Does your car come with a panic button for your alarm? If it does, there is a chance that the doors open in case you hit the panic button and the lights go off to alert people around you. Check with the manufacturer of the alarm.
How do you program your keyless remote control fob for Dodge Journey?
1. Turn your key to the "Run" position, but do not start the engine. Shut the doors and wait for the warning beeps to stop. 2. Hold the "Unlock" button on the currently programmed remote for five seconds, and then press and hold the "Panic" button (while still holding "Unlock") for one second. 3. Press and hold the "Lock" and "Unlock" button on the same remote for a few seconds, then release the buttons and press the "Unlock" button. 4. Press and hold the "Lock" and "Unlock" button on the new remote, then release the buttons and press the "Unlock" button. Repeat the procedure for up to four remotes within 30 seconds.
What car alarms have a panic button on a keychain?
The Bulldog Remote Talking Alarm System has a panic button.
What is a panic button on a car remote for?
alarm goes off
How do you program remote for 1996 Dodge Caravan?
To program a remote you must already have a working remote. If you do not have a working remote you must take to the item to a dealership or automotive locksmith for programming or ground a certain wire. (Google that) Procedure 1 1. Insert key into the ignition turn it to the ON position ( do not start the car) 2. Press and Hold Unlock on the functioning remote for 10 seconds. 3. While holding the Unlock button press the Panic button for one second. Release both buttons at the same time. Vehicle will chime signaling programming mode. 4. Press any button on the 1st remote to reprogram vehicle will chime again. 5. Press any button on additional remote to program a second remote. 6. Turn off ignition to exit programming. Procedure 2 1. Insert key into the ignition turn it to the ON position ( do not start the car) 2. Press and Hold Unlock on the functioning remote for 10 seconds. 3. While holding the Unlock button press the Panic button for one second. Release both buttons at the same time. Vehicle will chime signaling programming mode. 4. Press the lock and unlock button together on the remote and release. Vehicle will chime press and release the Unlock button and the vehicle will chime again signaling programming. 5. Press and release Lock and Unlock together on the second remote vehicle will chime. Press and release Unlock button on the remote vehicle will chime again signaling successful programming. 6. Turn off ignition to exit programming.
How do you program keyless entry remote for 2002 dodge ram?
How do you program a keyless entry remote for a 2002 dodge1. Press LOCK button 5 times at 2 second intervals to resynchronize remote.2. Insert key into the ignition switch. Turn ignition to the RUN position (as far as you can go without cranking engine). Wait for ignition chimes to stop.3. Using the working remote, press and hold the UNLOCK button on the remote for 4 to 10 seconds.4. Within the specified 4 to 10 seconds, continue pressing the UNLOCK button and then press the PANIC button ( on the programmed remote ) for 1 second and release both buttons. A chime will sound to indicate that the remote programming mode has been entered ( allow 3 seconds for chime to sound ).5. Within 30 seconds of the chime, press and release the LOCK and UNLOCK buttons simultaneously then press and release just the UNLOCK button on the same remote. A chime will sound indicating the remote has been programmed. Press and release the LOCK and UNLOCK buttons simultaneously and then press the UNLOCK button on each new remote you wish to program at this time. Locks will cylce afer each additional remote is programmed.6. Turn the ignition OFF and remove key.7. Test Remotes.
How do you program the remote for a 1997 Chrysler Sebring?
To program your 1997 Chrysler Sebring remote, take your remote and key in the car with you and press the 'lock' button on the remote five times. Put the key in the ignition and turn it to the 'on' or 'run' position, then wait for the chimes to stop. Next, press the 'unlock' button on the remote and hold it down for four seconds. While holding the button down, press the 'panic' button at the same time and hold them both down for one second before releasing them. You'll hear another chime. Next, press the 'lock' and 'unlock' buttons at the same time and release them at the same time. Finally, press and release the 'unlock' button. When you hear the chime again, you're finished.
How do you program 2001 PT Cruiser keyless entry remote?
Instructions1Enter your car and turn the ignition to the "Run" position.2Press and hold the "Unlock" button on the keyless remote for four seconds, then press and hold the "Panic" button while still holding the "Unlock" button.3Hold both buttons simultaneously for one second then release them.4Wait for a chime to sound from your car then press any button on the remote within 30 seconds.5Wait for another chime and the programming will be complete. You can then turn the ignition key to the "Off" position.
How do you shut off my ford installed alarm with the OEM 3 button remote?
If the horn is honking and the lights are flashing just push the panic button on the remote to stop it
What is a RKE battery?
it stands for Remote Keyless Entry... it means your battery in your key that you had come with your car that has the lock unlock and panic buttons on it, is running low in battery. take it to your dealership and they should replace it for you and your "RKE battery low" light will not be seen again after you get a new battery for your key...
