How do you program a keyless entry remote for a 2002 Dodge
1. Press LOCK button 5 times at 2 second intervals to resynchronize remote.
2. Insert key into the ignition switch. Turn ignition to the RUN position (as far as you can go without cranking engine). Wait for ignition chimes to stop.
3. Using the working remote, press and hold the UNLOCK button on the remote for 4 to 10 seconds.
4. Within the specified 4 to 10 seconds, continue pressing the UNLOCK button and then press the PANIC button ( on the programmed remote ) for 1 second and release both buttons. A chime will sound to indicate that the remote programming mode has been entered ( allow 3 seconds for chime to sound ).
5. Within 30 seconds of the chime, press and release the LOCK and UNLOCK buttons simultaneously then press and release just the UNLOCK button on the same remote. A chime will sound indicating the remote has been programmed. Press and release the LOCK and UNLOCK buttons simultaneously and then press the UNLOCK button on each new remote you wish to program at this time. Locks will cylce afer each additional remote is programmed.
6. Turn the ignition OFF and remove key.
7. Test Remotes.
You can't program the keyless entry remote for the Dodge 2500 yourself. You have to have it done at a Dodge Dealership. The cost is around $75.
With the dealers scan tool.
how do you program keyless entry remote 98 GMC
That requires a scan tool. Usually a trip to the dealer.
How do you program a keyless entry remote for a 2005 KIA Amanti? Kent
How to program a keyless entry remote for 2008 Pontiac g5
How to program a keyless entry remote for 2008 pontiac g5
how to programm keyless entry remote for 2005 kia spectra5
The 1989 Buick Park Avenue does not come with a remote keyless entry. The keyless remote entry was not available till 1997.
I have a use remote that I need to program
It will depend on the make and model of the car. They do this so one can make a copy of the automated keyless entry remote.
How program my keyless entry remotes for 2003 chevy malibu