i DONT THINK YOU CAN.
Most problems I have had with lights end up being the switch on the sreering columb. I have replaced 4 of them for all different reasons.
only on the 2+2 models (NA) models. twin turbo models were 2 seats......if you you wanted a 4 seat twin turbo it would have to come directly from japan
Remove the belt from your 1985 Nissan 300 alternator. Remove the wiring harness from the alternator. Remove the alternator retaining bolts. The alternator will come off.
The breake lights on a 2003 Chevy suburban come on when the car is not being uesed, becausethat is the way thay are made?
first things first.. go the easy way. check your fuses.if that isn't it follow your wiring from the light fixture.. take off the wire loom and look carefully for an open in the wire.. chances are its green and broke off and not sending power to the bulb..
No it doesn't come turbo. there are a few people who have customized them to use turbos though.
No, turbo has always been an option
That depends on which model you have, but it either used a Garret T3 ('84-'87) or T25 ('88-'00). -------------------------------------------------------------------------------------- On the 1990-1996 Nissan 300ZX (Z32) the stock turbos are two (2) T25 turbos. Note: The automatic transmission models come with a smaller Turbine A/R than the Manual transmission. So, the automatic's turbos might spool a tiny bit faster, but will die off sooner in the higher RPM's I have no knowledge of the previous model 300ZX's turbos, sorry. For more info or details e-mail me at Dream300ZX@gmail.com
a 1990 7.3 l engine does not come standard with a turbo. you can add an aftermarket turbo if you want ,the turbo 7.3l engines came out in 1993 and the powerstroke came out in 1994
The turbo was re-introduced to the USA market in 2005.
change blown fuse for interior light,fuse is found on the inside drivers side kick panel....
how do you get the turbo on the td5 110 to come in below 2000rpm advise please thankyou ross how do you get the turbo on the td5 110 to come in below 2000rpm advise please thankyou ross