one phase is a wild leg off the power transformer
This will cause no problem to any of the connected equipment. If you read the specifications on the side of a receptacle you will find that the rating of the receptacle is usually 125 to 130 volts depending on the manufacturer of the device.
Because it is a 220 volt outlet instead of a 120 volt outlet. Now, if this is a standard 120 volt outlet that is reading 209 volts then someone has made a mistake in the wiring. You need to call an electrician to straighten this out.
Any where from 110 volts to 130 volts alternating current is available from a 110 VAC outlet.
In the US a general purpose receptacle outlet would be 120 volts; England 240 volts, France 115 volts, Libya 127 volts, Okinawa 100 volts, Tanzania 230 volts . . .; all depends on where your house is.
There is no correct voltage between he prongs on a 120 volt outlet. The voltage is constantly changing. It depends on the time of day and what your home demand load is. The utility company is mandated to keep the voltage between plus or minus 10%. This means from the base voltage of 120 volts it could be as high as 132 volts and as low as 108 volts. These voltages are a major swing differential and very seldom seen. The voltage generally reads about 115 to 125 volts.
My outlets have 132 volts in the kitchen! And 130 at the shop witch is 300 ft away ! Is this to much ! And transformernot cutting enough
This will cause no problem to any of the connected equipment. If you read the specifications on the side of a receptacle you will find that the rating of the receptacle is usually 125 to 130 volts depending on the manufacturer of the device.
Because it is a 220 volt outlet instead of a 120 volt outlet. Now, if this is a standard 120 volt outlet that is reading 209 volts then someone has made a mistake in the wiring. You need to call an electrician to straighten this out.
The outlet is rated for 30A, so anything up to, but not exceeding 30A can be plugged in.
Any where from 110 volts to 130 volts alternating current is available from a 110 VAC outlet.
In the US a general purpose receptacle outlet would be 120 volts; England 240 volts, France 115 volts, Libya 127 volts, Okinawa 100 volts, Tanzania 230 volts . . .; all depends on where your house is.
There is no correct voltage between he prongs on a 120 volt outlet. The voltage is constantly changing. It depends on the time of day and what your home demand load is. The utility company is mandated to keep the voltage between plus or minus 10%. This means from the base voltage of 120 volts it could be as high as 132 volts and as low as 108 volts. These voltages are a major swing differential and very seldom seen. The voltage generally reads about 115 to 125 volts.
A duplex outlet is 115vac.
Yes you can safely do this. Most appliances that are marked 115 volts will operate on outlet between 110 and 120 volts safely.
Be it AC or DC any device who's nameplate reads 10 volts.
A power supply receives 120 volts of AC power from a wall outlet and converts it to 3.3, 5, and 12 volts of DC power.
I have never seen a 100 Volt rated outlet. Usually outlets would be rated for 110 to 120 volts for residential use, or maybe 150 volts. The rating is separate from what voltage the outlet is providing. If your outlet is supplying 100 volts, as measured by an accurate voltmeter, you have some problem in your wiring or a faulty outlet. If there is only 100 volts at the outlet get an electrician to diagnose the problem if you are not completely familiar with home wiring. In general you should never use an outlet that has a voltage or current rating less that the device will consume.