There should be a lever down by the brake pedal. it will look kind of like a gear with a tab on it. that lever releases the parking brake. just be careful not to let the parking brake pedal smack you in the face....
press the pedal down as far as you can and as it goes up...it should release it...
my parking brake release did not take off the parking brake on my 2001 chevy s10? is there a way to disengage it?
Above the brake pedal where the master cylinder is attached to the brake pedal assembly.
The brake light switch located above the brake pedal is broken or out of adjustment.
Above the brake pedal where the master cylinder actuator rod attaches.
where is the drake light switch on a 1999 chevy s10. The brake light switch is located just above the brake pedal. You will need a flashlight to see it.
You might have an ABS problem or a problem with the brake master cylinder. Check the fluid level in the brake reservoir.
The only way your headlights can come on when you press on the brake pedal is a crossed wire. The brake light wire and the headlight wire can be frayed and touching each other.
Under dash, drivers side, above parking brake.
To see a diagram of a Chevy S10 parking brake system you can visit your local auto parts store. The store will have a diagram that you can look at or will able to order you one.
With engine off--pump brake until all vacuum is exhausted With foot on brake start vehicle--brake pedal should drop