Have radio code. remove battery remove tray _ 4x6mm bolts, 13mm spanner undo live feed wire 8mm spanner remove solinoid feed wire. leaning in engine bay, undo 1 botton bolt , one top bolt and one that ges through from back to front (only just visable through mass of pipes and wires, All with 13mm spanner With all 3 bolts removed, the starter will exit from under the car, guided between the gearchange levers and the exhaust - you think it wont , buy it does, Reversal of all points to reinstall Took me 3/4 of an hour. Many scratches to upper arms, bad back, cut fingers, a pain in the bum, but not as bad as some cars ive worked on. hannahman58@lycos.co.uk
how to remove starter motor for Peugeot 206 1.4 hdi.
In the space under the hood.
The motor is above the switch and interior light.
not sure about the 206 in particular, but they use the teeth around the flywheel to turn the engine over so id imagine its attached to the gearbox/clutch housing somewhere :D
Hi Just had mine done on a 2002 206 LX HDI with 120K on it Cost £150 from trusted local mechanic including labour and perfect now
by alcohal
A similar car to the Peugeot 206 is the Peugeot 205 which the Peugeot 206 is modeled after with minor modifications and upgrades from the Peugeot 205 to the Peugeot 206.
The Peugeot 206 1.4 liter diesel engine holds three quarts of motor oil. The manufacturer recommends that the motor oil is changed every 7500 miles.
It is easy to find a used Peugeot 206 in the UK. Fernside Motor Company in Croydon, Surrey has 98 currently in stock. Also, Hartwell Hereford Ford Peugeot has several in stock too.
How to disable Peugeot 206 immobilizer?
206gti.net has a useful guide with pictures for headlight removal... http://206gti.net/globechange/
In general, the blower motor resistor is located close to the blower motor.