No. MIDI is a data port, not audio port.
in the usb port of your laptop/usb port of your cpu
Make sure you have it plugged in the USB port and also have a controller plugged in a controller port.
Port
Its the socket in the computer where the monitor or projector is plugged in
That depends on the scanner. Typically they are plugged in to either the USB port or the parallel port, depending on how the scanner is designed.
the master cylinder is designed so that when the brakes are applied, the pistons (primary and secondary) closes the compensating port and opens intake port. this allows brake pressure to be formed in brake system to apply brakes and allows brake fluid to fill behind pistons (through intake ports) when you release the brakes, the primary and secondary piston springs push their pistons (inside the master cylinder) to its rest position, faster than fluid can fill the chambers. this causes the brake fluid to flow past the piston cups (this happens when the rubber cup flexes foward) as the pistons pass the compensating port, brake fluid is allowed to return to the master cylinder reservoir. the intake and compensating ports act as a breather for the master cylinder. hope this answers your queston :)
Type your answer here... Correct Answer: Allow for the normal expansion and contraction of brake fluid due to temperature changes
With an OBD2 scan tool plugged into the port.
Charge it by leaving it plugged in to a powered USB port.
a flash drive
Charge it by leaving it plugged in to a powered USB port.