0
A thyristor is a rectifier semiconductor between two electrodes that permit unidirectional flow in anodes and cathodes.The flow of the current can be switched by a gate electrode that controls main driven electrical devices.To check a thyristor the current flow (between emitter/collector terminals) is checked.Then a small base current is applied to see if the thyristor functions as a switch.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How thyristor used in induction furnace?
Thyristor is used for Rectifiying and inverting the power supply in induction furnace. The parallel Resonance Coils (Current Control Furnaces) Control the Furance power up to 40% by controlling the firing angle of the rectifier inverter and remaining 60% controlled by inverter thyristor control. In rectifier they are varying the thyristor firing angle from 15 deg to 45 deg. (in sin wave)
What is conduction angle in thyristor?
not a clue a A: It all depends on the thyristor. There are no calculation involved not until you look up the thyristor specifications and decide on the load of the thyristor then you may calculate or more likely choose.
What is the function of thyristor?
Thyristor is a kind fast acting switch. These are fully controlled switches
What are the application of a thyristor?
The industrial applications of a thyristor are:To trigger a triacTo produce gate signalsto be used for controlled rectification
What is the switching speed of thyristor?
25microsec
How thyristor used in induction furnace?
Thyristor is used for Rectifiying and inverting the power supply in induction furnace. The parallel Resonance Coils (Current Control Furnaces) Control the Furance power up to 40% by controlling the firing angle of the rectifier inverter and remaining 60% controlled by inverter thyristor control. In rectifier they are varying the thyristor firing angle from 15 deg to 45 deg. (in sin wave)
What is the thyristor firing circuit?
The thyristor is basically used a switch in an AC circuit to control the amount of power fed to the load. To turn on this switch an "electric" pulse should be applied to the Gate terminal of the Thyristor. A circuit which supplies the "electric" pulse is called the firing circuit.
What are types of thyristor?
Types of thyristor firing art
What has the author S Enamul Haque written?
S. Enamul Haque has written: 'Power factor improvement of a thyristor controlled, inductive load with fixed capacitor, thyristor-controlled reactor (FC-TCR) type compensator' 'Exact analysis of a thyristor-controlled load in the presence of source impedance and compensated by a fixed filter(two branch filter) thyristor-controlled reactor (FF-TCR) type compensator' 'Exact analysis of thyristor-controlled inductive load with fixed capacitor-thyristor-controlled reactor (FC-TCR) type compensator' 'Exact analysis of a thyristor-controlled load in the presence of source impedance and compensated by a fixed filter-thyristor controlled reactor (FF-TCR) type compensator'
What is conduction angle in thyristor?
not a clue a A: It all depends on the thyristor. There are no calculation involved not until you look up the thyristor specifications and decide on the load of the thyristor then you may calculate or more likely choose.
What are the seminar topics related to power system engineering?
static type thyristor controlled excitation system
Turn off and turn off mechanism of thyristor?
The turn off and turn off mechanism of a thyristor can be best explained by the gate turn-off thyristor. The thyristor uses the reverse bias mechanism.
What is the difference between thyristor fuse and normal fuse?
A: THYRISTOR can be used to clamp damaging energy as opposed to a fuse that must blow open and invariably takes time to blow. A thyristor is much faster and controllable actually if the problem disappear it can be made to open up again and restore power for normal operation.
How does a thyristor function?
A thyristor is a semiconductor device which acts as a switch.
What is the function of thyristor?
Thyristor is a kind fast acting switch. These are fully controlled switches
What does forced commutation mean?
The term "Forced commutation" is used when a thyristor is turned off using external components. If a thyristor is used in a DC circuit, when first turned on, it will stay on until the current goes to zero. To turn off the thyristor it is possible to use a Forced commutation circuit. The circuit creates a reverse voltage over the thyristor (and a small reverse current) for a short time, but long enough to turn off the thyristor. A simple circuit consist of a precharged capacitor and a switch (e.g. another thyristor) parallel to the thyristor. When the switch is closed, the current is supplied by the capacitor for a short while. This cause a reversed voltage over the thyristor, and the thyristor is turned off.
Can we replace a thyristor by a mosfet?
No because a mosfet does not work the same as a thyristor. In a thyristor the current flows even when the gate pulse is removed, until the current stops. That is not the case for a FET.
