answersLogoWhite

0

A thyristor is a semiconductor device which acts as a switch.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What is the function of thyristor?

Thyristor is a kind fast acting switch. These are fully controlled switches


What are types of thyristor?

Types of thyristor firing art


What is conduction angle in thyristor?

not a clue a A: It all depends on the thyristor. There are no calculation involved not until you look up the thyristor specifications and decide on the load of the thyristor then you may calculate or more likely choose.


Turn off and turn off mechanism of thyristor?

The turn off and turn off mechanism of a thyristor can be best explained by the gate turn-off thyristor. The thyristor uses the reverse bias mechanism.


What is the function of Thyristor module in inverters?

Usually these devices will conduct during an AC phase cycles to charge a capacitor to produce DC.


What does forced commutation mean?

The term "Forced commutation" is used when a thyristor is turned off using external components. If a thyristor is used in a DC circuit, when first turned on, it will stay on until the current goes to zero. To turn off the thyristor it is possible to use a Forced commutation circuit. The circuit creates a reverse voltage over the thyristor (and a small reverse current) for a short time, but long enough to turn off the thyristor. A simple circuit consist of a precharged capacitor and a switch (e.g. another thyristor) parallel to the thyristor. When the switch is closed, the current is supplied by the capacitor for a short while. This cause a reversed voltage over the thyristor, and the thyristor is turned off.


Can we replace a thyristor by a mosfet?

No because a mosfet does not work the same as a thyristor. In a thyristor the current flows even when the gate pulse is removed, until the current stops. That is not the case for a FET.


What are the two conditions necessary for a thyristor to begin to conduct?

There are more than two conditions that can make a thyristor conduct, but the general (functional) ones are: 1) positive voltage form anode to cathode, and 2) a positive voltage on the trigger input (referenced to the cathode) for a standard polarity thyristor. Other conditions can be: A) Anode-Cathode Voltage exceeding thyristor witholding voltage. B) Overtemperature of the thyristor chip C) Faulty thyristor (can be caused by overloads)


How can a conducting thyristor be turned off?

A conducting thyristor can be turned off by reducing the current flowing through it below the holding current value. This can be achieved by interrupting the current flow using a circuit breaker, reverse biasing the thyristor, or triggering the thyristor with a gate signal that transitions it into a non-conducting state.


What are the application of a thyristor?

The industrial applications of a thyristor are:To trigger a triacTo produce gate signalsto be used for controlled rectification


What has the author S Enamul Haque written?

S. Enamul Haque has written: 'Power factor improvement of a thyristor controlled, inductive load with fixed capacitor, thyristor-controlled reactor (FC-TCR) type compensator' 'Exact analysis of a thyristor-controlled load in the presence of source impedance and compensated by a fixed filter(two branch filter) thyristor-controlled reactor (FF-TCR) type compensator' 'Exact analysis of thyristor-controlled inductive load with fixed capacitor-thyristor-controlled reactor (FC-TCR) type compensator' 'Exact analysis of a thyristor-controlled load in the presence of source impedance and compensated by a fixed filter-thyristor controlled reactor (FF-TCR) type compensator'


What is the switching speed of thyristor?

25microsec