Programming remote for Isuzu Rodeo

Answer 1

1. Move the driver's seat forward, and locate the security system control unit mounted on the underneath the seat.

2. Turn on ignition switch on.

3. Press and hold the green programming button on the control unit with a pen. you will have to poke through a hole about the size of a pencil located on the side of the unit. when the security system LED on the instrument panel comes on, release the program button, (Step 3 and 4 must be done within 5 seconds of each other.)

4. Press and release the top button on the transmitter, check that the LED goes out chirps once, and the front marker lights flash to confirm that the transmitter's code worked by the control unit.

5. if you have other transmitters to program, repeat steps 3 and 4.

6. Turn the ignition switch off to exit the programming mode.