0
What else can I help you with?
How is an above ground pool pump different from an in ground pool pump?
In simplest terms, an above ground pool pump is a flooded suction pump, which means the water level must be higher than the pump for it to operate, and an inground pump has the ability to draw water up from a level lower than the pump. The engineering and structure of these two different types of pumps is what makes them work the way they do. This means that, in a typical installation, you could use an inground-specific pump on an above ground pool, but not an above ground pump on an inground pool with the water level below the pump.
Can an in ground pool slide be used for an above ground pool?
Generally...no. In simplest terms, an above ground pool pump is a flooded suction pump, which means the water level must be higher than the pump for it to operate, and an inground pump has the ability to draw water up from a level lower than the pump. The engineering and structure of these two different types of pumps is what makes them work the way they do. This means that, in a typical installation, you could use an inground-specific pump on an above ground pool, but not an above ground pump on an inground pool with the water level below the pump.
Why is dirty water coming out of my return jets when vacuming its a inground pool its has a brand new pump an motor?
You may have a new pump and motor, but it sounds like the internals of the filter itself are broken and should be either repaired or replaced.
How much do above ground pools cost in comparison to in ground pools?
In simplest terms, an above ground pool pump is a flooded suction pump, which means the water level must be higher than the pump for it to operate, and an inground pump has the ability to draw water up from a level lower than the pump. The engineering and structure of these two different types of pumps is what makes them work the way they do. This means that, in a typical installation, you could use an inground-specific pump on an above ground pool, but not an above ground pump on an inground pool with the water level below the pump.
Can you connect a garden hose to a inground swimming pool pump?
You can probably find the plumbing to step down to the right size but the pool pump will have more water flow then a garden hose can safely handle. Your going to ruin either the pump or yourself.
How noisy is a heat pump and pool pump for an inground pool approximately 23000 gallons?
A heat pump can be quit noisy. Possibly some of the newest ones are quieter. Almost all new pumps now are fairly quiet. Some are even called whisper-flo.
What kind of in-ground swimming pool maintenance is needed over winter in cold climates?
To winterize your inground swimming pool, first backwash the filter, and then disconnect the pump. Purchase winterizing chemicals for the pool water, and be sure to use a pool cover.
What size pool pump for 25000 gallon inground pool?
The size of your filter limits the size of the pump, a 1 hp sta rite dura glas is great pump a 1hp should do you . If you have solar 1 1/2 hp is needed to push the water up on the roof.
Can a well pump be used for a pool pump?
== == My pool is about 15 yrs old. It is 15,400 gal, with a 600 gal spa next to it, and they both run off the same 1.5hp pump. Works great. In my case, the spa dumps excess water into the pool, so I keep the pool & spa returns open all the time and the overflow eliminates worrying about balancing the water flow. Jim. Our pool is 20000 gal and a spa next to it with 1000 gal both operated by a 2 hp Jacuzzi brand pump for the last 10 yrs, also 5 solar panels on the roof for heating....works great corys530
How long does it take for a heat pump to warm an inground swimming pool in New York State in 55-75 degree weather?
Well, it depends on the size of heat pump and the size of pool! However, a 30x12 ft, 2-3.5ft deep pool with an 18kw heater will take 4 to 5 days.
What is the best pool cleaner for a weak pump?
Poolerific! (...Warning this is not a real brand
How do you prevent an inground pool from being pushed up from water pressure under the pool if the deep end is below the water table of a nearby pond?
Keep it full of water. Otherwise, put gravel below and around the pool before it is built, then install a shaft and put in a sump pump. make sure the sump pump is on whenever the pool is to be empty.
