First make sure the gasket is clean in front and behind it, removing dirt and debris. Dry everything completely and then use a hose in short bursts in specific spots, one area at a time until you find the leak. We found that stuffing thin polyethylene foam between the gasket and car-body bulked out the gasket at that spot enough to improve the seal to the door. Probably a length of thick foam weatherstripping added beneath he rubber gasket might work too, depending on where your leak is and how bad it is. If that does not work, you can order new gaskets for about $100.
http://en.allexperts.com/q/Chevrolet-Repair-808/99-Suburban-Interior-Door.htm
You can fix a sagging door on a 1996 Suburban by replacing the door pins and the bushings.
what size are the door speakers for 2003 chevy suburban
A quick fix for a fuel filler door on a new Beetle automobile is to use a paperclip where the hinge should be. If the door is completely broken off, a new door should be purchased.
Check the switch first to see if it's getting juice (bypass) If it is, see if motor is binding. You will have to pull panel on said door.
I have it at my house.
with the key
There is a sticker on the driver's door or door jam and it will tell you.
What are you trying to repair on the door?
I am including some cheap repair door stores for you Best Door Repair and here is their site www.bestdoorrepair.com , and this site www.armorconcepts.com
Check the info plate in the Driver's side door
I have a 1997 suburban 1500 4wd. The door plate is missing. What is the recommended tire pressure?