rank the following from highest to lowest in data transmission speed twisted pair, coaxial cable, fiber-optic, microwave, and satellite
Without the following information being provided a person will not know what the correct answer is. It is important to also include what the following key elements are.
10BASE2, or IEEE 802.3, is an early Ethernet Standard that makes use of industry-standard RG-58 coaxial communications cables connected to BNC T-connectors. 10BASE2 gets its identifier, assigned by the Institute of Electrical and Electronics engineers (IEEE), from the following characteristics: "10" means it has a maximum transmission speed of 10Mbps; "BASE" is shorthand for "Baseband Transmission" or "Baseband Ethernet," meaning that the medium only transmits Ethernet signals; and "2" refers to its maximum network segment length of 185 meters, rounded up to 200 meters.
Keyboard
function as a repeater
1.5Mbps
ATF- Automatic Track Following ATF- Automatic Transmission Fluid
Which of the following light technologies is known for losing very little light during transmission
SMF
First tell us what 'the following' is.
I guess that you are puzzled by the lack of a transmission dipstick....there isn't one! See the following site for an illustrated guide to changing/checking the auto-transmission fluid. http://www.taligentx.com/passat/maintenance/ Enjoy
The amount of data that the transmission media is able to carry. Transmission timing The method that will be used for transmission Information regarding the physical setup of the network All answers are correct.
I found oneThe problem is that you have the wrong Model in your questionThis is a 4T60E transmission Not An AT60EIF you google the following search you will get you exploded view on first web site4T60E transmission parts
The transmission is located in close proximity to the engine, usually (in Hyundai's) transversely mounted directly under and behind the engine (behind the engine in terms of: following from the front of the vehicle towards the rear of the vehicle). If you follow the transmission fluid dipstick housing (shaft) down - that transmission fluid dipstick housing will end directly into the upper-most part of the transmission housing.
10 G base SW
The shift solenoids are located in the valve body of the transmission. This is inside the transmission pan. You can identify the solenoids using the following diagram: http://autorepair.about.com/library/pictures/illustrations/bl051lib.htm
I have a 2003 Lincoln Navigator with a 5.4 engine and it use the following: TRANSMISSION FLUID - Motorcraft Mercon ATF (16.4 QRT) TRANSFER CASE - Motorcraft Mercon ATF (2.0 QRT)
Plants are the exception.