0
under the hood there is a bolt on the strut tower do not take it off until you have the spring compressed outside the car. There should be three bolts that hole the strut bar if you have one on top of the strut tower. after you jack the car up you have to take the two bolts holding the spindle to the strut. i believe it is a 22mm head on the bolt and a 24 mm nut take the nut off then try hammering the bolt out after taking both bolts out the A arm can swing down. take the three nuts off under the hood and take the strut out from under the car. compress the spring with a spring compressor and remove the nut from the top of the strut. the whole spring should slide off then all you have to do is put it back together
What else can I help you with?
What is the procedure for replacing a 2002 Buick Lesabre front strut?
Whats the procedure for replacing a 2002 Buick Lesabre front strut.?
Front strut removal installation procedure?
I want to try and remove and replace my front struts on my 1995 buick lesabre is there a chance of seeing on line pictures of how to?
How to remove the front strut on a Honda accord without removing the tire?
You must remove the wheel/tire in order to remove the front strut.
How hard is it to change 1986 Chevy cavalier front struts?
To change the front strut it is not hard at all. Simply remove the tire, remove the break, remove the bottom bolts from the strut. Then remove the top bolt from the strut. Usually takes about 20-40 minutes to remove. Replacing is very simple as well. However, the front strut replacement will require a front-end alignment to be completed.
How do you replace front struts 2002 Buick Lesabre?
To replace the front struts on a 2002 Buick LeSabre, begin by safely lifting the vehicle and removing the front wheels. Next, disconnect the sway bar link and the lower bolt from the strut assembly, then remove the upper strut mount bolts from the engine compartment. Once the strut is free, replace it with the new strut, reassemble the components in reverse order, and ensure everything is tightened to the manufacturer's specifications before lowering the vehicle back to the ground. Always consider having an alignment done after replacing struts.
How do you remove and replace a front strut on 97 Nissan Sentra GXE?
Remove the bolt on the botton of the Strut. Detach the steering Knuckle. Remove the three nuts on top and remove the strut from the car. Do not try and disamble the strut without a spring compresor. Get a whole new strut. Good luck
How do you replace front strut on 1995 eagle vision?
To replace the front strut on a 1995 Eagle Vision, first, safely lift the vehicle and remove the front wheel. Disconnect the strut from the steering knuckle and the upper strut mount by removing the nuts and bolts. Remove the strut assembly, then install the new strut by reversing the removal steps, ensuring all connections are tight. Finally, replace the wheel and lower the vehicle.
How do you replace a strut mount on 2007 Buick lucerne?
To replace the strut mount on a 2007 Buick Lucerne, first, safely lift the vehicle and remove the front wheel corresponding to the strut you are replacing. Then, detach the strut assembly by loosening the upper strut nuts under the hood and the lower bolts at the steering knuckle. Replace the old strut mount with the new one, reassemble the strut assembly, and ensure all nuts and bolts are securely tightened before reinstalling the wheel and lowering the vehicle. Always consult a repair manual for specific torque specifications and safety precautions.
How do you replace struts on a 1993 Buick Skylark?
To replace the struts on a 1993 Buick Skylark, start by safely lifting the vehicle and removing the front wheels. Disconnect the strut assembly from the steering knuckle and the upper strut mount by removing the necessary bolts. After that, remove the old strut and replace it with a new one, ensuring all bolts are torqued to the manufacturer’s specifications. Finally, reassemble everything, replace the wheels, and lower the vehicle.
How do you remove the front struts on a 2003 mercury marauder?
To remove the front struts on a 2003 Mercury Marauder, first, safely lift and support the vehicle and remove the front wheels. Disconnect the sway bar link and the brake line bracket from the strut, then remove the upper strut mount bolts from the engine bay. Finally, remove the lower strut mounting bolts from the knuckle and carefully pull the strut assembly out of the vehicle. Make sure to follow safety precautions and consider using a spring compressor if you're also replacing the strut springs.
How do you change a Renault clio front strutt?
First, open the hood. Now remove the brake line support so that you can begin to get to the strut. Remove the pinch bolt that holds the strut at the bottom. Drop the sway bar that is connected to the strut. Now remove the bolts the interior bolts that support the strut. Remove the old strut and replace it with the new one.
How do you remove the front struts from a 2002 x-type 2.5 awd?
To remove the front struts from a 2002 Jaguar X-Type 2.5 AWD, first, safely lift the vehicle and remove the front wheels. Then, disconnect the brake line and any sensors attached to the strut. Next, unbolt the strut from the steering knuckle and the upper strut mount located in the engine bay, ensuring you support the lower control arm. Finally, carefully remove the strut assembly from the vehicle.
