from what i gather, you just need to pull it enough so that the clips release and the handle comes off, however i am currently trying this method and am affraid to pull any harder than i am now. please let me know if you have any luck...?
That's what I am asking you. How do you replace a parking brake handle on an S-10 1996 Chevy Blazer?
The 1998 Chevy Corvette parking brake can be adjusted with the parking brake adjustment bolt. You can also adjust the parking brake cable.
The 2001 Chevy Cavalier parking brake has an adjustment bolt on the parking brake assembly. Turn the adjustment bolt to loosen or tighten the parking brake.
On a 1998 Chevy Blazer, the parking brake switch is located on the top of the parking brake assembly. There are 3 bolts that hold the switch to the parking brake assembly.
2001 #2500 series rubber gromet on backing plate , remove , parking brake adjustment shoud be visable . use brake adjusting tool to rotate star wheel on inturnal parking brake to losen P. brake. then remove brake rotor and pads check P Br. shoes alot of work! mike s.
First make sure rear service brakes are adjusted properly Parking brake adjustment should either be at the junction of the three cable under vehicle or at the parking brake handle (May have to remove trim to access)
How do you adjust the parking brake on a1994 Lumina?
The fuse box is located under the cover just to the right of the parking brake release handle.
The 2000 Chevrolet Impala parking brake will have an adjustment bolt on the parking brake assembly. Turn the adjustment bolt to loosen or tighten the parking brake.
my parking brake release did not take off the parking brake on my 2001 chevy s10? is there a way to disengage it?
On most cars with a foot pedal parking brake, there is a handle usually just above it that you pull to release the brake.
Remove the cover of the parking break handle. On the back (opposite the button you push to release) there is a little nut to tighten and loosen.