This is a fairly simple replacement, behind the alternator will be your blower motor. There should be some small screws holding the case on to the ducting assembly, and a couple wires. Undo all, and carefully slide the motor out. DO NOT try to replace the motor, and use the old squirel cage. You will be making the repair again if you do. Just buy a new assembly with both the motor and cage.
can i reset it or replace it ,where is it on the car
The ECM is located behind the glovebox on a 1991 Cutlass Ciera. Pull the glove box out to see it. Once located remove the mounting hardware and unplug it from the car. Replace the unit.
yes, most of the panels can be used from one to the other
Yes, you do.
The firing order for a 1986 Oldsmobile Cutlass Ciera 2.8 V6 is 1, 2, 3, 4, 5, 6. The number one cylinder is on the front left as you face the engine compartment.
how do you replace the headlight switch on a 1993 cutlas ceria*
where is cam senor on a 91 cutlass ciera 3300
where is the knock sensor located on 93 cutlass ciera
i used this document for my 93 ciera. amazingly easy to follow. http://www.installdr.com/InstallDocs/GM/PDF/460009.pdf
Thermal relay is stuck. Replace it.
Where is the signal flasher located on a 1987 Oldsmobile Cutlass Ciera?
It's on the firewall up high on the passenger side. You may need to remove the alternator to get it out.