Want this question answered?
The 2006 Toyota Matrix takes a special 11" rear wiper blade that fits the special rear arm. This wiper blade can be difficult to find in stores, however see related link below.
The 2008 Toyota Highlander rear wiper blade size is a special 12" rear wiper blade that is very simple to replace once you find a replacement. Unfortunately, most stores do not stock this special rear wiper blade so please see sources and related links below for more information and installation videos. Once you get the wiper blade, there will also be step-by-step instructions on the packaging.
stick the wiper blade up your hole - I can't figure it out either.
$3 or so at any Toyota dealership. Ask for the wiper refill for a Matrix for the same year as your Vibe.
Get the blade directly from a Subaru Dealer. The other brands do not fit . I've tried to adapt them, it will not work. Get the whole wiper blade arm and blade from Subaru only. Very expensive for a wiper blade around $18
Once you get the correct rear wiper blade, its literally a snap! The wiper blade is tough to find, however see below. Also see below for an installation video.
It is easiest to replace the back wiper blade by carefully prying off the cap at the bottom of the wiper and then remove the whole wiper arm. After that you will be able to easily replace the wiper blade per the instructions given by the wiper blade manufacturer. Once you have done that, simply reattach the arm and snap the cap back in place. This process will take you less than five minutes.
2009 Toyota RAV4 rear wiper blade replacement procedure is extremely simple once you find the hard-to-get special rear wiper blade. See sources and related links below for installation videos and wiper information.
The 2008 Toyota Prius rear wiper blade size is a special 16" rear wiper blade that is very simple to replace once you find a replacement. Unfortunately, most stores do not stock this special rear wiper blade so please see sources and related links below for more information and installation videos. Once you get the wiper blade, there will also be step-by-step instructions on the packaging.
I just did it (have a 1996 ford explorer xlt) , on the blade there are 4 slots in the middle, perpendicular to the rear window. One of them has a tab in it. And I just jabbed my key in the slot and lifted the blade of the peg. You can get replacements, I think they are 16" and they have to be quickconnect.
The best thing to do on an ineffective lawnmower blade is to replace it.
I have no experience on that particular model but they are usually held in place by a spring-clip. Gently push a broad blade screw-driver between crank and door lining and you should see it. Remove with fine long-nosed pliers. Replace in same way.