Replace tail light bulb on a 2004 Lexus rx 330?

Answer 1

to remove and replace tail light on Lexus

2004 rx

330

Open back hatchback

remove felt panel. start at bottom middle and pull out.

There are some plastic clips that will just pop out of metal part of car. you may have to pull hard to get eh first one to pop out. then go to the right and left popping out the remaining clips til the panel is off. set down pane;

next is upper plastic panel. start

in middle and pop panel from clips and go to left to right until the panel is almost off.

you should be able to see all the wires going to all

the bulbs on back of car.

find the one you want to replace and grab the plastic base and turn to the left. you may have to use some pliers to turn to left. . go counter clock wise to undo. turn counterclockwise

and pull out base.

now remove bulb by just pulling it straight out of base.

Take to store and by exact replacement bulb.

replace bulb but be careful not to touch bulb with your fingers as oil from your fingers can ruin the bulb.

return the bulb and base back to the location . be careful

to line up base to the proper tabs on the base (metal part of car). once base is pushed it turn it clockwise to seat it back in

reverse the process and replace plastic panel and then felt panel and you should be all done. line up clips to fit back in holes on metal part of car and push in to seat them.

now if only others would explain the process from beginning to end like this life would be much easier than someone just replying to buy bulb and replace it.

People need much better explanations .

Good luck