Which engine does your 1985 Chevy Celebrity have? The two engines are very different.
To change the water pump on a 1985 Chevrolet Celebrity with a 2.5L engine, first, disconnect the negative battery cable and drain the coolant from the radiator. Remove the serpentine belt, then detach the water pump by unbolting it from the engine block. Clean the mounting surface, apply a new gasket or silicone sealant as needed, and install the new pump. Finally, reassemble everything, refill the coolant, and reconnect the battery.
drop the gas tank
I got it for $17 at napa auto parts. you should also replace the water pump while changing the belt. the pump is about $29 at advance auto parts. good luck.
You may need to replace your oil pump.
on top of the water pump housing
Depends on the motor. Automd says around $211.26 for where I live. Use it to see around how much it should be in your location.
Inside the fuel tank. The tank has to be removed and the fuel sending unit removed to replace the fuel pump.
To change the water pump seal on a KTM 85, first drain the coolant and remove the water pump cover by unscrewing the bolts. Then, take out the old seal and clean the sealing surfaces thoroughly. Install the new seal, ensuring it sits flush, and reassemble the water pump cover with new gasket if necessary. Finally, refill the coolant and check for leaks.
All years of the Chevy Celebrity model are front wheel drive.
Please upgrade to a Nissan product. Thank you.
if you look behind the water pump straight down u can see the timing marks.
If the oil light is working and is off with engine running, then you have oil pressure. To determine how much pressure, you need a pressure Gage.