auto or manual hubs
What is the tonque specs on the front wheel bearing for an 02 ford F150
first you need to state. 2or 4 wheel drive.next the year and if it is 4x4 with or with out lookout then we can help.
Faulty wheel bearings usually squeak or squeal. A whining noise is more likely to come from a power steering pump low on fluid, or from a faulty alternator.
Yes.. I Have a 1990 F-150 4X4 and it is a 5-Speed Manual Transmission
if replacing fluid in converter and cooler its 14 quarts
remove wheels.remove brake calipers, remove 4x4 locking hub.with special socket remove axle locking nut. brake rotor will the slide off enabling you to change bearings
f150 can a4 wheel drive wheel fit on a 2 wheel drive f150 both 6 bolt pattern
pull the wheel, remove the bearing dust cover, remove the cotter pin, remove the castle nut, slide the hub off, take out the rear seal and bearing, knock out the races reinstall in reverse order. pack bearings and hub with good grease don't go cheap. oh it helps to remove the brake caliper for a first timer
Open the bleeder valve on the 1990 F150 wheel that needs a line replaced. When the fluid stops flowing, loosen the line connections and remove the line. Install the new line, and bleed the brake lines after the reservoir has been refilled.
A grinding, snapping or dragging sound coming from breaks can be a sign that new breaks need to be put on. if the brake pads have been used after being worn out the rotors can become grooved and even warpedI have a 1995 f150 and I had a grinding noise and it was the front wheel bearings. not a hard job if you have the manual for the truck and bearings are fairly cheap. if it's more of a squeeling then it's the answer above.
rear wheel drive or 4x4 capable
No , rear wheel drive or 4X4 capable