Turn on the ignition but do not start the car, press the button on the end of the wiper arm until the "miles to next service" is displayed on the odometer. Then press and hold the trip reset button until the display resets to 18000. This should also turn out the service and stop light. Turn off the ignition then restart the car.
still light is on
you have to press in the button on the end of the wiper switch until you reach the spanner symble with only the ignition on and the car not running then hold for several seconds until it flashes and disapears but this spanner is telling you the car needs a service. Depends which model?
J3 chery how do you reset service spanner
ignition on.. using button on end of stalk scroll through to service indication.. press button at least eight times... ignition off.. ignition back on and all reset
On the Laguna 3 press the upper button on the right hand stalk until the service panel appears Hold the button in for several seconds and the panel will flash with the new mileage interval Release button andne service spanner light will go out Enjoy!
After a repair has been made on a Renault Laguna the service light will need to be reset. To do this plug the diagnostic tool into the computer and reset the light.
The spanner comes up to indicate that the car is due for a service. It should be reset by the garage after the service is carried out.
To reset the service spanner indicator on a 2003 Vauxhall Vectra 2.0 DTI, turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal fully three times within five seconds. Then turn off the ignition. Upon restarting the vehicle, the service spanner light should be reset.
To reset the service interval on a Renault Laguna, first, turn on the ignition without starting the engine. Then, press the accelerator pedal three times within 10 seconds. After that, turn off the ignition and restart the vehicle; the service interval should now be reset. If the reset is successful, the service indicator light will be off.
To reset the service spanner on a 2002 Fiat Ducato 2.8cc, turn on the ignition without starting the engine. Press the gas pedal three times within ten seconds, then turn off the ignition. When you restart the engine, the service indicator should be reset. If it remains lit, repeat the process.
To turn off the service spanner light on a Citroën Berlingo, you typically need to reset the service indicator through the vehicle's dashboard. Turn the ignition on without starting the engine, then press the trip reset button until the service spanner icon starts flashing. Finally, keep holding the button until the icon goes off, indicating that the reset is complete. If the light persists, consult the vehicle's manual or a professional for further assistance.
Car due a service? It will need to be reset by a main dealer
To reset the spanner light on a Polo Vivo, first turn on the ignition without starting the engine. Press the gas pedal fully three times within 10 seconds. After that, turn off the ignition. The spanner light should reset, indicating that the service reminder has been cleared. If it doesn’t reset, consult your vehicle's manual or a professional mechanic for further assistance.