RING TYPE JOINT FLANGE The ring type joint flange metal is used for leak proof process. It is a part of steel. Sometimes the pressure becomes high at that time the ring type joint flange is using. A metal ring is compressed like a seal helps to high-pressure leak proof. THREADED RING FLANGE In threaded ring flange welding is not needed. It is threaded or screwed into another. It is used in low pressure and it can connect only with other threaded material. LAP JOINT RING FLANGE Lap joint includes a stub end or taft. The lap joint is very easy to assemble and align because it is used in low pressure only. A hub is included in a lap joint ring flange but some will not provide to reduce the cost. BLIND RING FLANGE Blind ring flanges are not connectors they are like stoppers. Blind ring flanges are blank because they are used in the end or fitting for periodical inspection only. SOCKET WELD RING FLANGE In socket weld ring flanges the bore of pipe and the flanges both are same, it helps to provide the good flow. The receiver pipe also bored because the socket weld flange and the receiver pipe should tighten. WELD NECK RING FLANGE In weld neck ring flange the boring area and the flanges must be matched to avoid problems inside the pipe. In critical applications the weld neck is durable. SLIP-ON RING FLANGE The slip-on ring flanges don't have neck, it only has a molding area to fit with the pipe. In fabricated applications, the slip-on ring flange is very easy to use. for more check jfindustries
Joint compound AKA dope is used as a lubricant and to seal minor imperfections of the threads
Not cleaning the pipe or joint enough, not using flux, or not heating the pipe or joint enough. You use the blue tip of the flame on the joint and the capillary action sucks the solder into the joint. You have to clean the pipe with sandpaper or steel wool, the joints with a fitting brush on the inside, and use a proper flux and solder.
It is the only type of weld you can make to seal this type of joint. There are flange ends that can be welded onto pipe with a butt weld, but sockets and slip-ons must be fillet welded.
A flare joint is used on gas fittings and uses a nut and flare fitting to make the connection. This is a dry fit with no joint compound. The copper is soft enough that it compresses with the nut and forms the seal.
Pipe joint compound or Teflon tape
HDPE pipe can use a rubber ring, if the rubber ring is properly sealed with a steel gasket. The rubber ring must be placed in a groove in the pipe and then the steel gasket is placed on top of it.
Pipe grooved at end of pipe with grooving machine. Butt grooved pipe or fitting together and slip rubber seal onto end of each grooved joint, apply light coating of grease made for grooved piping on rubber seal. Coat split coupling for joint with grease also and put coupling around joint and clamp together tightly.
Mission CAP or IPS plug if there is a female fitting
RING TYPE JOINT FLANGE The ring type joint flange metal is used for leak proof process. It is a part of steel. Sometimes the pressure becomes high at that time the ring type joint flange is using. A metal ring is compressed like a seal helps to high-pressure leak proof. THREADED RING FLANGE In threaded ring flange welding is not needed. It is threaded or screwed into another. It is used in low pressure and it can connect only with other threaded material. LAP JOINT RING FLANGE Lap joint includes a stub end or taft. The lap joint is very easy to assemble and align because it is used in low pressure only. A hub is included in a lap joint ring flange but some will not provide to reduce the cost. BLIND RING FLANGE Blind ring flanges are not connectors they are like stoppers. Blind ring flanges are blank because they are used in the end or fitting for periodical inspection only. SOCKET WELD RING FLANGE In socket weld ring flanges the bore of pipe and the flanges both are same, it helps to provide the good flow. The receiver pipe also bored because the socket weld flange and the receiver pipe should tighten. WELD NECK RING FLANGE In weld neck ring flange the boring area and the flanges must be matched to avoid problems inside the pipe. In critical applications the weld neck is durable. SLIP-ON RING FLANGE The slip-on ring flanges don't have neck, it only has a molding area to fit with the pipe. In fabricated applications, the slip-on ring flange is very easy to use. for more check jfindustries
Joint compound AKA dope is used as a lubricant and to seal minor imperfections of the threads
Pipe grooved at end of pipe with grooving machine. Butt grooved pipe or fitting together and slip rubber seal onto end of each grooved joint, apply light coating of grease made for grooved piping on rubber seal. Coat split coupling for joint with grease also and put coupling around joint and clamp together tightly.
You can use pipe thread sealant aka "Pipe Dope" you can get this at most hardware stores.
A hole has developed in the spout or where it screws onto the pipe needs more Teflon tape or joint compound to seal the threads.
Teflon tape is good. There is now a teflon liguid sealer also. The old pipe sealer is still good. I used a piece of radio solder last year to seal a water meter joint when I lost the meter seal. Be inventive.
Yes you can seal a leak from cemented pipe elbow. I tried this few times and it works for me. If you can seal somehow temporily seal one end of the pipe, I use packing tape. Seal a the shop vac hose onto the other side of the pipe. The stronger the vac better. Turn the vac on, it will draw air from where ever it can. This will be at the leaks of course. Apply a generous amount of cement completely around the leaky edge of the pipe. The vacuum will then, draw the water out and the cement in. Then allow sufficent time to cure. That is just a temp cure. You don't want to dig again to get to the joint. Remove and replace. k
RTR pipe is Reinforced Thermosetting Resin Pipe (RTRP) or fiberglass pipe. A Keylock joint is a restrained joint, nylon rods (keys) slip into groove on the spigot and in the bell of pipe and restrain the pipe from pulling apart. The rods (keys) are removable.