You can try that what the other person suggested but i own a 2004 GMC Envoy and that could be a number of things mine turned out to to the cam and crank sensor take it and have it hooked to a diagnostic machine (i have one) and ask them what code it throws, it cost of course but its better knowing what the problem is instead of chasing it with different ideas. Try taking your gas cap off and putting it back on again. Otherwise wait til you need gas again. In my 2002 both cleared the problem. If those don't work, rent a code reader from your auto parts store and see what the problem is. Good luck if that don,t work, replace the gas tank cap. they cost about $22.00 .the part that makes the air seal was cracked.they charged me $78.52 parts and labor. there is a stiff plastic retaining strap holding the gas cap that will not let the cap turn easy when you get gas,this was a pain too.
To reset the service engine soon light on a 2004 GMC Envoy you can remove the ECU fuse. ECU stands for electronic control unit.
Indicative of problem with engine emission system
Disconnect battery and wait about 1 minute
Get a code reader from Autozone or a friend and plug it into the OBDII connection to read what code caused the check engine light to illuminate. A flashing check engine light indicates to NOT drive any further.
How to reset service light on a 2004 grand am
Its not a symbol. It will say "Service Engine Soon."
Have vehicle scanned to determine the problem
remove the negative on the battry for two hours
i have a 2004 chevy monte carlo and the service engine soon light is on what does it mean?
There are pages and pages and items that can cause a check engine light. You need to have it checked for codes with a scan tool. After repair light can be shut off with scan tool.
It means that the engine computer has detected a malfunction and set a code.
yes