What's my issue
Either try disconnecting the battery for about 10 minutes or have vehicle scanned to deterine problem and have codes cleared
In most cars, a service vehicle light can be reset by disconnecting the battery cables for one minute. After the cables are reconnected , the light should turn off.
It will vary for your particular vehicle.
The service light indicator on a 2004 Chevy Cavalier tells its owners when to send the vehicle in for maintenance. To reset the light, unplug the battery for five seconds.
Have vehicle scanned to determine the problem and have codes cleared
be more specific on vehicle type
Have vehicle scanned to determine the problem
With an OBD2 scan tool after the problem is repaired.
== == The simple answer is take it to the dealer and they can reset it. The other is to disconect the battery for 10 minutes and reconnect it. this will reset the computer. The motor will run rough for the first 5 minutes of drive time, but after all the sensors restet and re aquire the new data, it will smooth out. If the problem you had was fixed, then the light will not turn on. If you didnt fix it before the reset, then it will
The easiest way to reset a service light after the problem has been fixed on the SLK280 is to unhook the battery for about 5 minutes, then plug it back in. Another way to reset the service light is to turn on the key (without starting the vehicle), then pump the gas pedal three times, then turn off the key. The vehicle must be in any gear but park or reverse to do this.
There are a couple of ways to reset the Service Engine Soon light on a Suzuki Grand Vitara. The easiest way is to get a scan tool from your local auto parts store. Using the scan tool will reset the service engine light. Disconnecting your vehicle's battery is another way that often works to reset the Service Engine Soon light.
what type of vehicle is it if GM product on the driver side fuse panel