3 feet
Copper
You should use a plumbing snake to clear a clog.
No! Steel is a very bad choice for plumbing, as it rusts and can poison your water. PVC, copper, or clay pipes are recommended for plumbing.
Most standard domestic plumbing systems in north America will hold 125 psi, however most operate at anywhere from 35 -85 in daily use.
Plumbing Tools Everyone should have to fix any plumbing issues are.1. Thread Tape / Plumbers Tape2. Duct Tape3. Torch4. Clean Rag5. Adjustable Spanner / Wrenches.6. Hacksaw.7. Screw Driver8. Vice GripsSome Spares like Tap Washers etc.
Windows that can be opened.
Vents should be on the highest point of the stack and preferably on the wall outside and not in ducts, this due to future maintenance and ease of installation.
100% acrylic will work on any windows. Aluminum should use a Direct to metal acrylic paint.
Take cover in a nearby sturdy building in a room with no windows and preferably no exterior walls.
security, what has previously occured in ths home. is it worth the old age torisk things like plumbing issues, chattering windows(had that problm) security, what has previously occured in ths home. is it worth the old age torisk things like plumbing issues, chattering windows(had that problm) security, what has previously occured in ths home. is it worth the old age torisk things like plumbing issues, chattering windows(had that problm)
most local health departments have regulations on that, but it's not a bad idea. If the vent is too short, you will smell sewage in the yard, and possibly in the house if it's near windows or doors
If they run, no noises, clicing, shaking.
CEC - any window that has the capacity to be opened.The exterior electrical service wires should be at least 3 feet away from any part of any window that is able to be opened.
Plumbing tools should be replaced as needed,most quality tools carry a lifetime warranty.
Changing your kitchen plumbing is not a safety issue. Your pumbing should be changed only if they need it.
First, remove all encroaching vegetation. Then, replace rotted wood and broken support structures. Windows and entrances should also be replaced to guard from moisture and the inevitable mold that comes with it. You should check the wiring, load bearing structures, and Plumbing.
I usually get around $325 per 100 square feet for siding, soffit, trim, and to wrap all windows and doors