Windows should be installed after sheathing and before siding.
First, if you have not installed the wall sheating you should be able to force your framing back to square with the use of tempory bracing.Bracing should be used to keep framing square and plumb.It should be install on the interior as to allow the wall sheathing to be installed with bracing in place.I suggest plywood sheathing at least on all corners. This helps keep the framing square and plumb. Do not remove any bracing until all wall sheathing,trusses and roof sheathing have been installed.This is very important as the structure could collapse with out it.Also the trusses will need to be cross braced as they go up.
There should be studs around the window opening so you would be doing both. If you are asking when to do it, the windows go on top of the sheathing.
If you are talking about a fiber cement backer board, the manufacturer of the board should provide the answer you are after. I am currently using Hardiplank to reside my house, and the manufacturer recommends attacheing the TyVek house wrap to the wood sheathing per TyVeks recommended process. Hope this helps.
After framing a house you will have to either put plywood or particle board on the exterior walls of the new construction. Then you must put a sheathing on top of that. There are many different types of sheathing availabe and you should choose one that fits your needs. There are no codes that say you have to use one particular type of sheathing, unless of course the home owner requires Duro Foam.
Start with windows 2000 then windows xp.
Electric wire sheathing should not project more than one inch into the electric panel.
Electrical wire sheathing should not project more than about one inch into the electric panel.
Finding out which Windows Vista service pack is installed is fairly simple. Go to Start, Control Panel, System Maintenance and then the System link. It should show which pack is installed.
You'll need to edit boot.ini and add an entry for Windows XP.
Windows XP can never "run like Windows 7", regardless of the amount of RAM installed.
If the hardware is compatible and you have enough memory you should be able to purchase an "Upgrade" version of XP.
Yes, ActiveX is needed for many different parts of Windows operating systems and software on it.