It depends on what you are going to make it as. So, ask yourself are you going to make a circle with holes then you should probably make it without. As, with an oval you could do that too.
The best shape for a parachute is a circle. This is because the circle will have a larger area that will cause more drag to slow the parachute.
For a middle school project, you should design a parachute that is the right size for a small action figure. You can make the parachute out of an old pair of parachute pants.
make a big parachute
The parachute creates drag that opposes the rocket's motion, slowing it down. This drag force is generated as the parachute catches the air and creates turbulence, reducing the rocket's speed.
Make the parachute wider/bigger or make the parachute deeper. Make the thing pulling it down lighter. Hope this helps. =)
Circle circle left right square triangle down up
Yes, increase the constant term to make the circle larger.
The first parachute was made from silk. André-Jacques Garnerin, who invented the parachute in 1797, used a silk parachute to make successful jumps.
if you mean slits has in tears then NO If you do that then your parachute will not work and you`ll die.
the circular parachute 134.88m/s its average descent followed by a parallelogram one
You can make a parachute stay in the air longer by increasing its surface area, either by using a larger parachute or by adding more fins or panels to the canopy. You can also try adjusting the weight of the payload attached to the parachute to help it descend more slowly. Finally, make sure the parachute is properly packed and deployed to maximize its effectiveness in the air.
You Make sure your Plane is HIGH enough Altitude, then you with normal default settings / Press Circle "O" to jump out and then after a second or so, Press "X" and you should see a small parachute Icon at the bottom of screen.