Turn ignition to ON position. Press brake pedal all the way down for about 3-5 seconds. Then pump gas pedal 3 times quickly. Start the car. Oil change light should go off. Works for 2002 Grand Am.
The airbag light stays on when the computer has detected a malfunction and set a code. The failure will need to be repaired before the light will shut off.
The reset button is located on the drivers side fuse panel. I believe that you turn the ignition on but don't start, push button til light blinks then push again and it will make a chime sound and light should go off.
You should be able to pull out the fuse panel (open your driver's door and look at the side of your dash). In it, you should see a reset button. Press it.
shut off abs light on 1998 es300
Unscrew it from the rear of the light. You may have to take it off to do this.
No it will not
sorry it is not.
With the car off, turn the key to the run position. Press the gas pedal to the floor 3 times . The car will chime and the Change Oil light will turn off.
The light will shut itself off when the failure that the computer detected is repaired.
I have a 2000 Pontiac Grand Am. I recently had my oil changed and noticed the change oil light stayed on. To get it off I had to turn the key to the on / run position, but I did not start it. Then I had to push the gas pedal to the floor three times within 5 seconds. The change oil light went off after a few seconds. I turned the car off. I then restarted the car and the change oil light did not stay on, it went off with all the rest of the lights that come on when you first start your car.
109 mph
No.