Disassemble and clean the oil pump. Driver keys must be properly installed. Rotate gears that bend 180 degrees. Apply engine oil. Replace the check ball and install the opinion shaft gear. Connect the oil lines.
You should be able to obtain the oil pump installation instructions from the auto-parts store in which you bought the oil pump. The installation instructions can be found at most Harley-Davidson motorcycle dealerships.
Disassemble and clean the oil pump. Driver keys must be properly installed. Rotate gears that bend 180 degrees. Apply engine oil. Replace the check ball and install the opinion shaft gear. Connect the oil lines.
You can find step by step instructions for changing your oil pump in your SUV at Autoparts.com. It's pretty easy if you ask me. Thanks for asking this question.
The picture of how to replace an oil pump varies between models and brands. A service manual for your specific car will have pictures with instructions of how to chance the pump.
th purpose of an oil pump is to PUMP...OIL
the pressure of oil that the oil pump is pulling?
Remove the oil pan. The oil pump will be visible. Remove the oil pump pickup to. Remove the oil pump retaining bolts. Reverse the process to install the new oil pump.
The oil pump is inside the oil pan, the oil pan must be removed to gain access to the oil pump
There is no oil pump fuse, the oil pump is driven directly off of the crankshaft. Even if there was an oil pump fuse, you wouldn't want to pull it out.
The oil pump is located inside the oil pan; To get to the oil pump you have to take off the oil pan.
The oil pump is located inside the oil pan. You have to drop the oil pan to replace the oil pump.
Remove the oil pan. The oil pump will be visible. Remove the retaining bolts from the oil pump. Reverse the process to install the new oil pump.