The bolt head size is usually 15 mm. The bolt itself is typically an M10 x 1.0. The length of the bolt can be obtained from any GM deal with their parts fiche. That is the most accurate way of determining the type, size and length of any GM fastener
Do yourself a favor and call in the afternoon when the parts department is typically less hectic.
Installing a standard transmission in a 1994 Chevy z71 is easy. All you have to do is take the old one out and put the new one in and tightening the bolts back.
there is usually a metal plate on the transmission itself with that information on it, or you can tell by the number of transmission bolts you have in the transmission pan.
Unbolt the the power wires after disconnecting the battery. Then pull out the 2 or three bolts holding it in. then pull out the starter. Reverse for installation.
11 including five mount bolts
It is the part of the transmission case that bolts to the engine.It is the part of the transmission case that bolts to the engine.
Only if the van is a 4x4 too.
yes
That would be a 4L60E transmission
The type of transmission that is compatible with a 1994 Chevy is going to depend on the model. Every model has a specific motor which requires a specific type of transmission.
No it is NOT even close.
It is in the transmission itself.
That would be the 4L80E transmission.