There are four ways to find a ratio.
1 A dealer can normally tell from the vin number.
2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement
info.
3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.
4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
if its like my 84 put it in neutral on the shifter then select the 4x4 gear on the 4x4 shifter then place the shifter in d or r
No.No.No.No.
seems I'm answering my own question... turns out my 84 4x4 Jimmy with a 6.2 diesel and 700r4 trans runs the same 3.07 gear ratio as my 83 Sierra Classic 4x4 pick up with a 305 gas and 700r4 trans.
no sir,they are not.
The Lug pattern for an '84 Toyota 4x4 is 6x5.5 The Lug pattern for an '84 Toyota 4x4 is 6x5.5
the ratios of 28 and 7 is 25%
I was looking at motorcraft.com , and it lists 3 different part numbers for the front disc brake rotors on a 1994 Ford Ranger with the 4.0 L - V6 engine Motorcraft BRR39 for 2 wheel drive Motorcraft BRR36 for a 4 x 4 with all gear ratios EXCEPT 3.45 Motorcraft BRR40 for a 4x4 with 3.45 gear ratio ( that would be axle code 84 - conventional axle with 3.45 gearing ) The information sticker on the end of your drivers door should show the axle code
on an 84 Toyota the oil pump is located behind the harmonic balancer
84-88
any rear end from s10 or s15 from 84 to 2002 4x4 or 4x2 also small gm rwd cars Malibu Bonneville camaro cutlass youll have to be adventurous with ratios try to find closs to the rite one its written on your door tag or rear end itself
They are: 10 to 42, 15 to 63 and 20 to 84
no