If you haven't noticed pin 2 is sensitive to 50ua you can us that practically from anywhere to switch states
Every switch performs a control function. On / Off is a control function.
To control a light with a switch, the switch has to be connected in series with the light fixture.
Presuming the switch worked at one point and just stopped working it is likely that the switch has failed in a normally closed position. The only other possibility is that somehow you have a wire problem whereby the hot side of supply is connected to the load side of the switch. This could be caused by an exposed wire in the switch receptacle. Suggest you turn off power at breaker and replace switch as a start. When you have the switch removed from the receptacle, with wires still connected see if switch works. If it does it could still be bad, but examine the wires around switch and see if you have any exposed wire that could be touching the load side of the switch (Side connected to the light).
"LCS" in electrical terms means the "load control switch." This type of relay is controlled by a remote and placed on several types of home appliances to supply large amounts of power, such as dryers and electric water heaters.
Switch
The remote control sends a radio signal to the base unit, and the base unit interprets the signal to switch the connected appliance on or off. Some remote control can operate multiple switches from a distance.
a control switch is a sort of remote controlled relay attached to home appliances which consumes more power.
buy a universal control
Wired remote control devices date to the twenties and are used to control railroad and subway switches and signals. Indeed Remote-Control was for a time a patented trade phrase for Union Switch and Signals systems.
You build an electronic device to control a transistor switch that causes a mechanical device to push the switch. Now days we bypass the mechanical switch and the circuit can do the switching.
When installing a remote light switch one must first turn the power off. This will prevent shock or electrocution. Next, unscrew the plate currently on the wall and remove the switch and wire the new one with remote. Next remove the light from the ceiling and install the remote sensor. Place light cover back over light and turn power back on. Program and test remote control to ensure wiring was correctly installed.
the remote control dragon fly
I am looking for the remote control to switch the televison channel.
Check to see if the shifter is not all the way into park. If it is Your neutral safety switch my be inoperative. The remote goes through the body control module to the neutral safety switch. Good luck!
A remote light switch is a switch that triggers a light by remote. You can get one installed through your local home department store and have it rigged up to a universal remote.
hold b back of wii remote use control pad left and right to switch sim
A switch that can be used to control the working of home appliances like flush system, hand dryer or else. The wireless switch needs no remote control for its working. You only want to move your hand between the infrared LED and photo transistor to control the device or load.